Our fume hoods has been tested by SGS and got approval, it ensures the safety features of our products.
Dimensions(W× L× D): 1200/1500/1800X850X2350mm
Window:
1.one whole piece of 5mm thick tempered safety glass sashes in PP frame, able to sliding laterally in the frame and vertically with the frame.
2. Frame balanced from elevation and sides so as it can be stopped at any position by pulling up or down.
3. PP grab handle along the glass edge which is chemical resistance.
Exterior Structure: 1.2 mm thick coldrolled steel folded, welded, polished, acid cleaned, phosphoresced, and coated with electrostatic, corrosion resistant. And oven dried spray paint.
Interior Claddings: 5 mm thick compact panels on the side with air flow guides on top to protect the wall and facilitate air discharge. Modular construction
That can be easily disassembled for cleaning and reassembled. Acids, Alkalis, moisture and high temperature resistant.
Working table: 19mm epoxy resin workop with 25mm edge which is continuous on all four sides of the worktop.
Lighting: 30 Watt antisepsis daylight lamp fitted in gas insulated housing to provide not less than 400 LUX of light flux on the working table.
Socket: Four sets of 220 volt/ 10 AMP multi-functional electric socket outlets with water proof cover.
Lab accessories:
1. Yellow brass, epoxy resin coated water control valve and cock.
2. Yellow brass, epoxy coated gas control valve and cock. The gas valve is with safety function to avoid air leakage, it will not be unintentionally turned on unless you press it.
| Size(mm) |
Air Volume(m3/h) |
Differential Pressure(Pa) |
Noise dB |
| 1200x850x2350 |
1200~1800 |
40~85 |
≤48 |
| 1500x850x2350 |
1500~2000 |
40~120 |
≤48 |
| 1800x850x2350 |
1800~3000 |
60~150 |
≤48 |
Remark:
1. We can add polypropylene storage cabinet in the under cabinet to store strong chemicals.
2. We can furnish duct and fan if it's required by customers.
3. We can furnish custom-built fume hood based on customer's requirement.
中文
