Product Introduction: 

Serve motor drive TC50/MT12 peristaltic pump, special for flow injection analyzer. MT12 pump head, use overall block design to improve the accuracy between channels. The error between channels ＜3%. TC50 control unit, use 4.3 inch industrial grade true color LCD screen, touch screen control. Speed range: 0.1-50 rpm/min, flow rate range: 0.0016-10.5ml/min. Dynamic display the transferring status, flow rate, setting parameters and system configuration in the same screen. Intelligent calibration and online micro adjusting function. 3 measurement modes: Fixed volume measurement, Fixed time and volume, Timer start and stop achieve different transferring and dispensing request. Unique motor working status output signal, can be used for other equipments to monitor the peristaltic pump working state. Different external control modes for selection, also have programmable external control mode. Support RS232 and RS485 communication interface, MODBUS protocol. The TC50 pump is the first choice for multichannel, high precision and micro flow rate liquid transferring.

Functions and Features: 

1、Imported 4.3 inch - industrial grade - true color LCD screen, clear picture quality, more guarantee quality. Dynamic display working state, flow rate, rotation speed, setting parameters and system setting in the same screen. 
2、Imported touch screen operation, high hardness, anti-scratch, high sensitivity, attention users' experience.  
3、Serve motor drive, precise control, strong power, low vibration and low noise. 
4、Shenchen-V-CIR circuit system, use imported chips, computing speed fast, reliable performance, working stable. 
5、Shenchen-V-EMB operation system, embedded software design, powerful function, friendly interface,  attention to users’ experience. 
6、Intelligent calibration function, can calibrate the flow rate or dispensing volume, ensure the flow rate accuracy. Suitable for high precision transferring liquid. 
7、Fixed volume measurement function: After turn on this function, the pump will measure the liquid volume automatically, it will stop automatically after the volume reach the set value. During the process, you can change the flow rate freely. It is suitable for laboratory liquid dosing and chemical reaction process. 
8、Fixed time and volume: After turn on this function, the pump will transfer fixed volume within set time. It is suitable for liquid dispensing in laboratory and industrial production. 
9、Timer start and stop function: Can set the pump start and stop time freely, reach automation control. 
10、Plenty external control function, besides start/stop, direction, speed control, RS485/RS232 communication interface, our pump have Shencehn-V-EMB-PGM programmable external control function to meet special industrial control request. 
11、Online micro adjusting function. During the production process, if the tubes fatigue or abrasion, you can use the online micro adjusting function to adjust the flow rate without stop the pump. 
12、Unique accurate angle control technology, achieve high accuracy dispensing and dosing. 
13、Fast filling function, not only can be used for washing the tubing, but also can fill liquid to the tubing fast. 
14、Automatic temperature control system, reducing the fan noise effectively. 
15、Load-shedding memory function, store the running parameters in time, safe and reliable. 
16、Strong anti-jamming feature, wide voltage design, suitable for complex power supply environment.  
17、Circuit board spray with three paint, anti-dust, anti-moisture, anti-static, resist corrosion. 
18、304 stainless steel housing, comply with pharmaceutical GMP certificate requirement.  Meantime, use seamless welding technology, avoid accidental spilled liquid on the housing infiltrate inside, to protect the inside circuit board.

Product Composition and Flow Rate :