1. water bath nitrogen blowing concentrator
2. could use any size tube ( diameter 10--29mm), conical flask, centrifuge tubes
1. water bath nitrogen blowing concentrator
2. could use any size tube ( diameter 10--29mm), conical flask, centrifuge tubes
Introduction
WB-N101 model water bath pressure blowing concentrator also use world advanced technology
to quickly concentrate sample with blowing nitrogen gas.
This instrument includes: base, sample shelf and gas distribution system.
Bottle is fixed by spring clip supporting base. Each hole have number.
Gas through the flow meter to the gas distribution system. Thus nitrogen gas goes into each valve
and stainless steel Needle, which could quickly concentrate sample.
Each pipe height could be adjustable according to different bottles or solvent quantity.
Technical data
1. Temperature range: room temp---99 10C( digital display)
2. Temperature control accuracy: ±10C
3. Tube Size(diameter): 10--29mm; Beaker: <30mm
4. Gas flow rate: 0--15L/min ( with gas flow rate adjuster)
5. Gas consumption: 330ml/min/sample ( adjustable)
6. Sample Treatment: 12 holes
7. Heating method: water batch under stable temperature
8. Size: ¢26*15cm
Characters:
1. Could be used any size tube ( diameter 10--29mm), conical flask, centrifuge tubes, sample quantity 1--50ml
2. Sample holes: 12 position.; use spring clip to fix sample bottle.
Each one have number mark.
3. Adjustable needle valve, which could control gas flow rate
4. Round size, could rotate. easy to take off each sample bottle.
5. Gas needle length is 150mm, stainless steel made
6. Round size water bath structure, digital to display temperature. Water temperature range from room temp to 99 centigrade.
7. All material could bear organic solvent
8. When concentrate toxic solvent, whole system could be put fume hoods.
9. Have alarming function when dry heating.
中文
