Series/Type |
Beach Angle |
Centrifuge Applicable Material Features |
LWT Series Dewatering Type |
8.5° |
LWT series dewatering type decanter centrifuge is usually used to remove liquid from solid phase materials. It is designed for easy separation material include large particle size, high density difference of solid and liquid, low viscosity, high concentration, high treatment capacity and higher dryness than clarity. The materials like sludge or wastewater containing fine particles usually need to be added with flocculants to gather the fine particles condensed into large ones, and then dewatered with T series decanter centrifuge. |
LWY Series Separation Type |
15° |
LWY series separation type decanter centrifuge combines the advantages of T series dewatering centrifuge and C series clarifying centrifuge. It is designed not only for the clarity of liquid phase after separation, but also the dryness of solid phase. Y Series separation decanter centrifuge is especially suitable for fine soft material separation. It is usually used in soft materials which are difficult to separate. It suits for material of small particles, small density difference in solid-liquid, large viscosity and small concentration. |
LWC Series Clarifying Type |
20° |
LWC series clarifying type decanter centrifuge is generally used for materials that are difficult to separate, have small particles, small solid-liquid density differences, moderate viscosity, moderate concentration, and require high clarity of clear liquid. |
LWS Series 3-Phase Type |
According to material |
The design of 3-Phase horizontal decanter centrifuge is mainly used for solid-liquid-liquid 3-phase separation. It is required that the solid phase is heavier than the liquid phase, the two liquid phases are Immiscible with different densities. |