Features

Special stainless steel ice basinWith a volume of 6 liters, it is easy to take and place, and it is convenient for sterilization.

One-touch control switch

Press the control switch and the indicator light will illuminate to indicate that the refrigeration system is running. Pressing the switch again will end the cooling process.

Ice shovel

Each ice maker is equipped with an ice shovel to scrape any ice slush left on the sides of the pool and completely remove it from the ice maker. Ice shovel made of special material

Easy to move

Equipped with a handle to push the machine, the standard swivel foot can change the position of the machine at will.

Product introduction

Surgical slush freezer is designed for continuously producing a type of soft slush without pointed flake slush. For instance, it is used in emergency surgeries for transporting organs transplanted at low temperature, extracorporeal circulation surgeries for myocardial protection, organ transplantations, internal fixation of patella, renal parenchyma lithotomy and other surgeries.

Portable and easy to operate, it can store slush automatically. It does not need the support of other devices. The stainless steel slush basin conforms to hospital standards, specifications and requirements. In operating this slush freezer, infuse heat-conducting media (freezing point=-37°C). Then, fill the slush basin with requisite saline solution and press the control switch. When slush is produced, just stir the solution. If the slush is used up and still needed, repeat the above steps with precooled solution.

Product parameters

1. The ice-making basin has a holding capacity of about 6 liters, which is easy to move and disinfect.

2. The freezing temperature is -37℃.

3. Refrigerant: R404A

4. The copper tube inside the machine is soaked with a refrigerant, which can conduct sufficient heat exchange and has good cooling efficiency;

5. The ice tray is made of medical grade stainless steel, which is corrosion-resistant and can be sterilized at high temperature;

6. Adopt the compressor with good reputation in the industry to ensure the cooling effect; 7. The machine itself is equipped with a sewage outlet, which is easy to clean after use;

8. Air-cooling method, the ventilation openings of the shell have sufficient clearance, and the ventilation effect is good;

9. Power requirements: 220V/50HZ/1 phase 10. Have product-related intellectual property rights and patent certificates