CT-2000H Cold Trap with Temperature -40 Degree
Brief Introduction：
Capture water vapor and harmful gases emitted from vacuum drying oven or decompression concentration plant. Improve the service efficiency of the vacuum system, substantially , reduce the amount of steam inhalation of vacuum pump and extend the service life of the vacuum pump.
Features:
●The showing of cold trap temperature is useful for controlling the opening time of the vacuum pump and preventing piping of water being pumped into the pump.
●The cold trap slot adopts stainless steel SUS 304, which can be used for experiments of water system and ethanol system. Equipped with glass condenser, it can be applied in the experiments of acid system and organic solvent system
●It can be used as pre-freeze tank and low-temperature trough.
●Equipped with drain valve for easy drainage.
Precooling Rotary instrument
Slewing arrangement of flask for pre-cooling. When rotating, the solution is condensed into filmily on the wall, which can shorten the drying time.
■ Rotary speed：30～180 rpm
■ Available equipment models: all low-temperature cooling liquid circulating pumps
Technical data：
|
Model
|
CT-2000H
|
CT-2000L
|
CT-5000H
|
CT-5000L
|
|
Cold trap mode
|
Cooling directly dependent on barrel
|
Cavity cooling (glass condenser: matching,Direct freezing trap)
|
|
Dehumidification volume
|
Max.1kg（Water）
|
Max.4kg（Water）
|
|
Min. Temperature
|
-40℃
|
-80℃
|
-40℃
|
-80℃
|
|
Temperature digital
|
Digital display
|
|
Bath materials
|
Stainless Steel SUS 304
|
|
Interior size（mm）
|
200×200
|
250×250
|
|
Ambient temperature (℃)
|
5～25
|
|
Power Supply（V/Hz）
|
220/50
|
bio-equip.cn
中文
