Probably The Most Advanced-Efficient, Safe, and Ergonomic Biosafety Cabinet in The World
The new eSafe® Biological Safety Cabinet provides operator, product and environmental protection within laboratories and industrial facilities. eSafe® is powered by the latest generation ECM motor, that is more effecient than legacy ECM and VFD motors. With its Night Setback mode, power consumption is reduced by 60%. This provides 70% energy savings as compared to AC motor. eSafe® creates ISO Class 3 work zone instead of the usual industry-standard ISO Class 5. Blower plenum and side walls prevent contaminants from escaping outside.
Key Benefits
•Energy-efficient Dual ECM blower
•Stable, self-compensating airflow
•Large performance envelope
•Low noise and ergonomic design
•Large, user-friendly graphical LCD
•EN, Isocide, DualBlower, ECM
•The TUV-Nord certified cabinet models are: EC2-4L8, EC2-4S8, EC2-5L8, EC2-5S8, EC2-6L8, EC2-6S8
Features
Original Features Retained:
•Dual blower system
•Motorized sliding window with aerosol tight gasket
•IsocideTM Antimicrobial coating on all external and internal painted surfaces
•Quickstart mode - Touchless control system to start/shutdown the cabinet in a pre-programmed sequence
•Datalogging - Connection to BMS or personal laptop/PC to monitor all important parameters such as airflow values, alarms & blower hour meter
The New eSafe® BioSafety Cabinet has these Improvements to make it even better:1. Sentinel Platinum Controller
•The most advanced controller from Esco
•Modern layout with larger graphical screen and bigger keypad buttons
•Graphical display on Inflow, Downflow, Sash and Airflow Status
•Adjustable light intensity for the screen
•Blower adjustments directly done from the controller (easy to service)
2. Improved Airflow Sensor
•Stable reading with automatic compensation
•Operates at a larger temperature range of 8-35 degrees Celsius. (Infinity® -- 18-30 degrees Celsius)
3. Noise Level
•Quiet - Noise level has been reduced by 4-5 dBA compared to Infinity® Class II BSC
4. Dual ECM Blower
•Energy savings of up to 2/3 the original value AC blower was replaced to ECM blower
•Stable - It has a built in power stabilizer function that eliminates unstable airflow and intermittent airflow alarms
•Night-Setback mode / Stand-by mode - allows the cabinet to continue to run at half speed, keeping the working area clean with a good degree of containment
•Automatic airflow compensation - Increases the blower speed according to filter saturation
5. L and S Series
•L Series - Glass Sides with Multi-Piece Work Trays
•S Series - Stainless Steel Sides with Single-Piece Work Tray
Models
|
Model No.
|
External
Dimensions (mm)
W x D (w/ arm rest) x H
|
Internal
Dimensions (mm)
|
Airflow
Velocity (Inflow)
|
Airflow
Velocity (Downflow)
|
Electrical
|
|
EC2-4L8
|
1340 x 857 x 1450
|
1220 x 580 x 650
|
0.50 m/s (100 fpm)
|
0.35 m/s (70 fpm)
|
230VAC at 50/ 60Hz
|
|
EC2-4S8
|
1340 x 857 x 1450
|
1220 x 580 x 650
|
0.50 m/s (100 fpm)
|
0.35 m/s (70 fpm)
|
230VAC at 50/ 60Hz
|
|
EC2-5L8
|
1645 x 857 x 1450
|
1525 x 580 x 650
|
0.50 m/s (100 fpm)
|
0.35 m/s (70 fpm)
|
230VAC at 50/ 60Hz
|
|
EC2-5S8
|
1645 x 857 x 1450
|
1525 x 580 x 650
|
0.50 m/s (100 fpm)
|
0.35 m/s (70 fpm)
|
230VAC at 50/ 60Hz
|
|
EC2-6L8
|
1950 x 857 x 1450
|
1830 x x 580 x 650
|
0.50 m/s (100 fpm)
|
0.35 m/s (70 fpm)
|
230VAC at 50/ 60Hz
|
|
EC2-6S8
|
1950 x 857 x 1450
|
1830 x x 580 x 650
|
0.50 m/s (100 fpm)
|
0.35 m/s (70 fpm)
|
230VAC at 50/ 60Hz
|
Accessories
•Leveling Feet Stand, Sitting Posture
•Caster Wheel Stand
•Telescoping Feet Stand
•Hydraulic Stand
•Gas Service Fixture Kit
•Water Service Fixture Kit
•Vacuum Service Fixture Kit
•IV Bar Kit
•Air Tight Damper For All BSC
•Thimble Exhaust Transition
•Anti Blow Back Valve
•Tri-Safe Exhaust Module
•Plastic Decon Bag
•Ergonomic Foot Rest
bio-equip.cn
中文
