Login    Join free Add to favorites    中文
Home >Products> Incubators | Drying ovens >CO2 Incubators> Heal Force ® Air-jacketed CO2 Incubator
Incubators | Drying ovens:  CO2 Incubators   Plant Incubators   Biochemical Incubators   Hybridization Ovens   Constant Temp & Humidity Ovens   Vacuum Ovens / Drying Ovens   Other Incubators & Ovens  
Heal Force ® Air-jacketed CO2 Incubator
Heal Force ® Air-jacketed CO2 Incubator
Place of Origin:
China
Brand:
Nison Instrument (Shanghai) Co., Ltd.
Model:
HF 240
Supplier:
Nison Instrument (Shanghai) Co., Ltd.
Price:
Hits:
5809 
Updated:
3/22/2015
Related Products | Other Products | Related Suppliers
  • Product Detail
  • Company Profile
    Heal Force ® Air-jacketed CO2 Incubator HF90,HF240 (90°C Moist Heat Disinfection)

    During daily applications, one of the most headache problems is called microorganism contamination inside the incubator chamber. To eliminate the contamination, normally people are using manual cleaning, UV light disinfection (as HF 151UV and HF 212UV), or HEPA filter filtration. However, none of them can offer a complete solution to eliminate contamination. Now, HF90/HF240 CO2 incubator can be a new solution.



    CO2 Incubator 90°C Moist Heat Disinfection
    HF90/HF240 is equipped with a new function called 90°C Moist Heat Disinfection. By pressing the button of "90°C" on the control panel, the incubator will carry on a complete circle of disinfection procedure. The incubator will increase the chamber temperature up to 90°C and maintain it for 9 hours. The humidity inside the chamber will be above 80%. Then it will recover to the working parameters in about 14 hours (depending on the environment temperature). All the accessories inside the chamber like the CO2 sensor, fan and shelves are heat-resistant. The customer just need to take out the culture flasks or dishes, and the disinfection procedure will be done automatically.

    The results of 90°C Moist Heat Disinfection procedure is tested strictly according to international standards. The germ, Bacillus subtilis varietas niger spore (ATCC 9372), which is recommended for official sterilization by Ph. Eur. 97, 5.1.2 and USP 23.(3), was employed for test the result of 90°C Moist Heat Disinfection function. In average, 5.5 x 105 cfu/sample was distributed on all the surfaces of the chamber. After the disinfection procedure, all the sample areas are tested as negative and the elimination rate is 100%. The result is approved by Chinese Government Laboratory.

    CO2 Incubator Microprocessor control
    All control functions and date are controlled and monitored by a microprocessor. If a failure happens, the microprocessor will give out warning message and " Error Code " messages.

    CO2 Incubator Precise CO2 control
    Based on the proven thermal-conductivity testing method, a reliable CO2 measuring sensor is installed to measure and control the concentration of CO2 gas in the chamber, which ensures long-term stability of PH-values, even in the lower CO2 range.

    CO2 Incubator Heating system
    Unique direct heating and air jacket system maintains the inner chamber at a constant and stable temperature. This allows our incubators to operate under a perfect temperature / humidity environment and to maintain appropriate osmotic pressure in cells. The inner chamber is surrounded by a layer of insulation material, which prevents the incubator''s temperature from dropping too fast during a certain case of power failure. The out door of the unit is also heated and can be switched off separately if necessary. Also, it eliminates condensation on the interior glass door.

    CO2 Incubator Reliable temperature control
    High grade temperature sensor is made of platinum ( Pt1000 ) , together with the micro-processor controller ensures accurate and reliable temperature measurement and controlling. Thus, HF 151UV and HF 212UV can offer a reliable temperature control within the control range from RT +5 ²°C to 50²°C. Even more, an independent temperature sensor for over-temperature protection is installed for double controlling. It will take over the temperature controlling function if the main temperature controller fails.

    CO2 Incubator High humidity
    The incubators operate at high relative humidity. This protects your samples from drying out and maintains the appropriate osmotic pressure in cells, which is ideal for long-term cultures.

    CO2 Incubator"Auto-start" function
    Through " Auto-start " function, the incubators will set up an accurate culture environment when the incubators are turned on for operation.

    CO2 Incubator Interior design
    Smooth and corrosion-resistant stainless steel surface with special designed round inners make cleaning work much more easier.

    CO2 Incubator Rapid recovery time
    It ensures the culture conditions within the inner chamber quickly restored, which is very important for short-term cultures, or when the door is frequently opened and closed.

    HF240 CO2 Incubator
    90 ℃ Moist Heat Disinfection
    Monitoring the surrounding temperature
    Platinum(Pt1000) temperature sensor
    Direct heating and air jacket system
    TCD CO2 sensor
    "auto-start"function
    Independent over-temperature protection with a second sensor
    HEPA filter filtrate the CO2 inlet(99.998%@0.3um)
    Failure monitored and error code displayed.
    The bottom of the chamber is a incline and the water is put on the bottom directly. Heating of out door can be switched on/off
    Easy operation with soft-touch control panel

    Gas 6 half inner glass doors
    The smaller cross-section when opening the door effectively reduces the
    Gas exchange between the inner space and the outside air. The 6 gas tight
    doors come standard and provide independent compartments for reduced exposure.
    bio-equip.cn
    Nison Instrument (Shanghai) Co., Ltd. has 32 offices in most of the largest cities in China including Shanghai, Beijing, Guangzhou, Nanjing, Hefei, Jinan, Changsha, Fuzhou, Nanjing, Chengdu, Kunming, Xian, Shengyang, Wuhan, Chongqing , Zhengzhou , Shijiazhuang , Nanchang , Lanzhou, Xinjiang, Shenzhen, Xuzhou, Shantou,Xining, Hangzhou,Tianjing, Wuxi, Heilongjiang, Qindaoto create a wide sales network to cover whole China area, while Shanghai is the administration center in mainland China. There are totally 600 staff (included Hong Kong staff. Nison has distributors for their different products in aournd 70 countries in Asia, Europe, Oceania, Middle East, Arfica and America now, and also its international distribution network is growing rapidly.

    Nison Instrument (Shanghai) Limited- the company for export, exhibitions and advertisement on magazine and internet.
Request Information
Request Information: yes no
Request Quotation: yes no
refresh

I agree to share my inquiry with the other matching suppliers.

Send Now
Request Information

* Name:
Job Title:
* Tel:
Fax:
* E-mail:
Postcode:
Institution/Company:
Address:
* Country:
Request Information:
 yes no
Request Quotation:
 yes no
* Message:
* Verification Code:
 refresh
I agree to share my inquiry to the other matching suppliers.



Recently viewed products
SiteMap
Copyright(C) 2006-2025 Bio-Equip E-mail:web@bio-equip.cn Tel:+86-17717806891 (Wechat)