Use
1.when the Liquid is water, Through heater heating the water to boiling point,then water change to Seatm,then use Cooling system,make steam cooling to pure water, this process make the separation of pure water and impurities.
2.When the liquids are 2 or more kinds of items which have different boiling point. We should know the different items’ boiling point, then start to setup the machine.
(1).Find the lowest boiling point liquid of the all liquids. setup the Upper temperature and also TRD(2-5). Then start to run the machine till the lowest boiling point liquid be distillationed,
(2).Find another liquid which have more lower boiling point, setup as above.
(3).Till all liquid be separated
Main Features:
1.Have an ON/OFF switch button, no need unplug the power code for stop the machine, easy and safety.
2.Have an Fuse Holder with 2XF10A, it will be safety when short-ciruirt.comply with the European Electrical Safety Standard.
3.Have an Manual-type 110 degree Thermostat from USA Emerson Electric Co.this kind of thermostat are precisely than most brands,make the distillation water
4.Have an good structure for fixed the Emerson Thermostat for make sure the precisely and never loose control.
5.The Whole machine power=800 W, make sure the whole machine distillate 4L Pure Water only with 3.75 Hours.
| Model |
PURO |
| Capacity |
4L |
| Voltage |
220V/110V |
| Frequency |
50/60Hz |
| Power |
800W(Customized) |
| Output |
Over 6.5 Gallons per Day |
| Size |
460×265×310mm |
| GW/NW |
6KG/5.8KG |
| Use |
Household Pre-Filtration |
| After-sales Service Provided |
Free spare parts |
| Protection Temperature |
300℃ |
More Product Information: benovor.com/
Whatsapp: 0086 15956360274
bio-equip.cn
中文
