Ordinary Type Vacuum Freeze Dryer,specification,price,image-Bio-Equip in China

Product Detail
Company Profile

small mushroom Vacuum Freeze equipment

Specifications

experimental freeze dryer
1. for lab or pilot production ;
2. same control and working procedure as the production lyophilized
3. Excellent performance;

SJIA 0.2 to 1.2 square meter freeze dryer

Main application:

Fruit, vegetable, aquatic, meat, instant foodstuff, chemical stoneware condiment ect.

Capacity:

4~15kg per 20hrs

Main technical parameters

Drying area 0.12 to 0.5sqm

material of the shelves: stainless 316.

vacuum: <15Pa ,

heat exchange meduim :silicon oil;

shelves temperature : -50C to 70C;

cascaded system to achieve lower temperature

PLC Control system.

Compressor: TECUMSEH, From France

optional: CIP ,SIP,Top stopper

freeze dryer for Pharmacy

Purpose:

SJIA series vaccum freeze dryer ( In situ) is suitable for laboratory samples of freeze drying test,

and a small amount of production.The machine is with shelf sheating function,using PLC technology

which is accurate temperature control,human-computer interface using LCD screen with curves and data.

Technical characteristics:

1.pre-freeze drying processing is in situ,put the material into the drying cabinet, it is automatic for the process of freezing and dring.

2.The machine is cascade refrigeration technology,imported compressor which is low noise,large

cooling capacity and high capacity of water capture to reduce the time of freeze drying.

3.Silicon oil is intermediate medium in the shelves for heating to Ensure drying material uniformity,

temperature discrepany is ≤1°C

4.The shelf temperature can be adjustable and control which is Easy for exploring of semi-work and production process

5.The square shelf is difficult for distortion, and easy for operation and cleaning.

6.LCD display designed as touch screen, it adopt PLC control system, can display all

important curves and data, human-computer interface can provide the user more information for relevant freeze drying process.

7.Cold trap and operation panel are made by stainless steel,corrosion-resistant and easy to clean

8.The inflation valve is optional,which can be filled with inert gas.

9.The cabinet door is with high transparent colorless organic glass, The material change process

can be easily observed during the operation through the transparent door.

10.The recorder and computer communication interface is optional

	Speficication	SJIA-30F
Shelf System
1	shelf dimensions(mm)	300x400
2	No. of Shelves	3+1 radiant
3	Total shelf area(m2)	0.36
4	shelf clearance(mm)	70 - 180
5	MOC of the shelves	SS 304 or SS316L
6	Finish	pharma finish better than 220 Grit
7	Shelf temperature range	-60°C to +65°C
8	cooling time from 20C to -40C	60min
9	shelf uniformity
10	heater capacity	1KW
11	heating rate	Greater than 1°C
12	shelf fluid	silicon Oil
13	fluid pump	WILO or Grundfos
14	stoppering	optional

CONDENSER
1	Maxiumm low temperature	-75°C
2	MOC of the condenser	SS 304 or SS316L
3	Finish
4	condenser capacity	7 kg/24h
5	condenser area(m2)	0.54
6	coolling time from 20C to -40C	30min
7	defrost system	electric heater

Vacuum
1	ultimate vacuum	<10Pa
2	pump down time to 10Pa	30 min
3	chamner leak rate	<20 ML/S
4	sensor type	ZJ-54T
5	power failure protection

chambers
1	product chamber	rectangular chamber MOC SS304 or SS316L,
2	door	acrylic door door with opening to a max angle of 110°
3	sealing	split ring silicon ruber gasket
4	condenser chamner	round chamber with MOC SS304 or SS 316L