The mixture continuously enters Laboratory Centrifuge through an inlet at the base of the machine, into the hollow cylindrical rotor. The rotor turns at 30,000 and generates a centrifugal force in excess of 20,000 times the force of gravity. The Hi-speed Tubular Centrifuge is widely used in laboratory, university, or some testing, super centrifuge can be put on table or bench, we also call it bench centrifuge, its roation speed can be adjusted for different experiments, the laboratory centrifuge is very easy to be cleaned and sterilized. All wetted parts can be sterilized by autoclave or tubular centrifuge also can be produced for CIP.
The separated liquids are continuously displaced upwards by the incoming mixture, and discharged through their respective outlet ports at the top of the rotor. The layer of accumulated solids that builds up on the rotor wall is cleaned out when the centrifuge is shut down.
This particular rotor was designed to separate two liquids and to remove suspended solids, simultaneously - and it is known as a 'tubular separator'.
There are, however, many applications where only the removal of suspended solids from a single liquid is required. Super centrifuge for such applications are provided with but one set of discharge ports and are called 'tubular clarifier'.
bio-equip.cn
中文
