To meet the requirement of storing strong acid and alkali,the nether
cabinet is designed as acid storage cabinet which connects with exhaust system of fume hood.
The nether cabinet will exhaust only when the exhaust system of fume hood works.PP is used as the material for drawers and slide rails etc in acid storage cabinets.
Introduction:Introduction:Cabinet Structure: Material: All steel (1.2mm
cold-rolling steel) covered with electrostatic spraying after folding,
welding, polishing, acid cleaning,phosphorization,chemical resistance.
Inner liner panel: Imported from America, 6mm compact panel, acid and alkali resistance, temperature-resistance, anti-moisture.
Guide plate: Imported from America, 6mm compact panel, reasonable and knock-down guide structure. Concentrated and effective discharge air, letting off different poisonous gas.
Operation Table board: lab-grade phenolic resins worktop,or epoxy resin worktop,or ceramic worktop and stainless steel as worktop.
Window: 6mm thickness steel safe glass, balancing form elevation and subsidencei, it can be stopped at any position by pulling.
Lighting equipment: 30W antisepsis daylight lamp, lamp house is
insulated with gas. Lightness on table not lower than 400LUX.
Operation panel: lighting switch, ON/OFF switch, two sets of 220V/10A
versatile electric socket.
Ventilation equipment: selecting rust-resistance, low wasting, low noise
and famous fan and special wind tube. Noise can be reduced at about 55 DB.
Accessories:
vertical and single test cock: made by yellow brass, the surface is treated
by EPOXY baking paint.Cup slot: acid and alkali resistance, PP water cup
|
Type
|
Specification(mm)
|
Airflow( m³/s)
|
|
St1200
|
1200*850*2350
|
1200~1800
|
|
St1500
|
1500*850*2350
|
1500~2000
|
|
St1800
|
1800*850*2350
|
1800~2500
|
bio-equip.cn
中文
