 |
Redesigned head offers more positive tubing retention and improved flow performance |
 |
Flow rate: 0.002 to 43 mL/min depending on drive rpm and tubing size |
|
Reversible, one-channel pumping |
|
Polyphenylene sulfide (PPS), acetal, and copolyester pump head with four stainless steel (SS) rollers |
|
Max button runs pump at 100% of maximum rpm梪se to prime or to rapidly flush tubing |
|
Stackable, compact 1/4-DIN housing—mount in your equipment rack or place on your lab bench. (To mount, order brackets 77120-03 at right). |
|
Pumps accept continuous lengths of tubing for a clean, uninterrupted flow path with no fittings. |
|
Separate single-turn speed control and cw/off/ccw switch with green LED power indicator—maintain speed setting when you turn pump on/off or reverse direction. |
|
Reversible permanent magnet DC motor; purge fluid before or after pumping; pump fluid in either direction. |
|
Remote control connections on back of pump; start/stop pump with a contact closure. |
|
揗ax? button runs pump at maximum rpm—prime or rapidly flush tubing. |
|
Pump head has average fixed occlusion for tubing; no need to adjust occlusion. |
C/L pumps are compact (1⁄4 DIN) and perfect for low-flow OEM use or analyzer applications. These easy-to-use, economical pumps feature reversible pumping, remote control capabilities, and rapid tubing changes. Ideal for consistent fluid delivery in chromatography, spectroscopy, and dispensing applications.
Maximum suction lift of 5 ft (1.5 m); max discharge head of 20 ft (6.1 m); max pressure 15 psi (1.0 bar). Self-priming pumps withstand minor back pressure. |
| What's included: 5 ft (1.5 m) of 0.89-mm ID Tygon® LFL tubing and a dual-voltage (115/230 VAC) power supply with 6-ft (1.8-m) power cord. Pumps are shipped with cord/plug assembly appropriate to destination country. Order additional microbore tubing based on chemical compatibility and flow rate. |
中文
