Rotary evaporator RE-BK2000
Principle:
In the condition of vacuum,keep constant heating on the rotary evaporator,at the same time keep the rotating bottle uniform rotation, so the materials in the evaporator
would form a large area of film in the wall of the bottle,then the materials would evaporate efficiencily and turn into steam,which condensate in glass condenser, the condensation would enter the collection bottle.
Main points introduction:
1.Cooler: vertical, inclined, Cold trap type , fine quality high temperature glass double standard port back to the
integration with standard condenser collected bottles , easy to configure.
2.Feeder: Valve type feeding tube PTFE tube sockets, pipes and block the flow of PTFE laps.
3.Seal: PTFE Viton gasket vacuum
4. Rocker plate Button: Rocker panel hosts subordinates pressure rise, Rocker subordinates under pressure host decline.
5. screw cap : smooth rotation automatically fasten spin the bottle, the inverse spin fast shirk spin the bottle.
6. stepless with knob.
7. the host body alignment angle: Loosen or tighten the Knob.
8.Host body of stainless steel, rust proof aluminum, special engineering plastics, compact structure, attractive appearance,
durable, and practical.
9. Equipped with air duct cooling device.
Technical Parameter:
|
1 |
Main Design Data |
Main Machine: stepless speed regulator,0-130r/min,Auto-Risen/dropped vertically by micro-motor,0-150mm,40W Heating Bath: stainless steel pot Power Supply: 220V/50Hz, Power: 2.1KW |
|
2 |
Condenser |
vertical condenser with a 3000ml collecting flask, Du-loop heat-resisting condensing pipe, valve-continuous operating collecting quickly. |
|
3 |
Heating Bath |
Superior stainless steel pot, 2Kw heating device, Built-in sensor, Auto-controlling temperature. |
|
4 |
Dimension: |
Total packing: 490X370X580mm,
Total heavy: 28KGS. |
|
5 |
Control System |
Water bath with digital controller |
|
6 |
Packaging |
wooden Box |
bio-equip.cn
中文
