CHARACTERISTICS OF USES：
It is applicable for experiment reaction at atmospheric pressure and provides trueness, reliability and safety for the experiment. Through remote operation, the experiment personnel improve experiment efficiency and quality, also can escape from experiment site environment. The comprehensive performance is far better than that of equipments for experiment reaction at atmospheric pressure.
Performance
▲Realize constant control to temperature, rotate speed in the reaction process. Conduct real time display and record to the parameters such as temperature, rotate speed, torque and acidity commonly used in constant pressure chemical experiment reaction.
▲Data printing, which provide direct and detailed parameters basis for experiment and research and development personnel to design and observe experimental reaction effects.
Software
▲Including setup and control interface, curve graphic expression and data form.
▲Temperature and rotary speed interface can be set with numerical value and time according to experimenter’s demands.
▲Torque window can be set with maximum torque alarm value according to experimenter’s demands.
▲When a muddler is fall off, seized or reagent solidifies to the defined torque value, the device shall close each operation automatically.
▲The software records real time data and draws curve about five parameters of bath temperature, reaction temperature, rotary speed, torque and acidity.
▲Leach the interference signals from data.
▲The sampling frequency or data spacing can be set by the experimenter.
Technical data：
|
Model
|
ZNY-2000
|
|
Reaction Temperature scope (℃)
|
Room temp～300
|
|
Torque display range (N·cm)
|
0～1000
|
|
Range of speed control (rpm)
|
200～1500
|
|
Acidity measurement ranges
|
0～14 ， Measurement accuracy±0.1
|
|
Rated power (W)
|
90
|
|
Heater wattage (W)
|
700
|
|
PowerSupply（V/Hz）
|
220/50
|
bio-equip.cn
中文
