Dry Bath Incubator (Cooling & Heating) MK-20
The Dry Bath Incubator is a microprocessor-controlled product using advanced thermoelectric technique. With this technique, more stable and accurate temperature control is achieved. Replacement is convenient with optional metal modules of various specifications configured for different types of test tubes.
Features
1. LCD display. It easy to setup and use
2. Simultaneous display of set and actual time, temprature
3. As it is equipped with various optional blocks
4. Reliable design with inner extra temperature protection
5. Heave of the block makes block change easy and convenient
6. Temperature deflection adjusting meet with different demands
7. Microprocessor controlled incubation time and temperature.
8. Beep-signal / Stop after program completion
Specification
1. Temperature Control Range: -10℃~100℃
2. Timing Range: 1min~99h59min
3. Temperature Control Accuracy: ≤ ±0.3℃
4.. Display Accuracy: 0.1℃
5. Heating Time: ≤ 15min (from 20℃ to 100℃)
6. Cooling Time: ≤ 20min (from 20℃ to -5℃) If the room temperature is lower 30℃
≤ 30min (from 20℃ to -10℃) If the room temperature is lower 25℃
7. Heating and Cooling Parts: TE Module
8. Dimension (LxWxH): 300x220x170 mm
9. Net Weight: 5Kg
10. Standard Blocks: See " Dry Bath Blocks for MK-20"
Blocks for Dry Bath Incubator MK-20
|
Type |
Parameter |
Max. Temp |
Min. Temp |
|
A |
96×0.2ml PCR plate |
100℃ |
-10℃ |
|
B |
54×0.5ml |
100℃ |
- 10℃ |
|
C |
35×1.5ml |
100℃ |
-10℃ |
|
D |
35×2.0ml |
100℃ |
-10℃ |
|
E |
15×0.5ml+20×1.5ml |
100℃ |
-10℃ |
|
F |
24×Dia.≤φ12mm tube |
100℃ |
0℃ |
|
G |
12×15ml Falcon tube |
100℃ |
0℃ |
|
H |
6×50ml Falcon tube |
100℃ |
0℃ |
|
I |
103×67×30 Water bath block |
100℃ |
0℃ |
|
J |
96×0.2ml plate |
100℃ |
-10℃ |
|
K |
24×5.0ml |
100℃ |
0℃ |
|
L |
96-Deep well plate |
80℃ |
8℃ |
bio-equip.cn
中文
