Home >Products> Medical Lab Instruments >Microplate Readers / Plates Washers> iWO Washer
Medical Lab Instruments:  Microplate Readers / Plates Washers   Microbiological Analysis   Other Medical Lab Instruments  
iWO Washer
iWO Washer
Place of Origin:
China
Brand:
autobio
Model:
Price:
Hits:
3182 
Updated:
9/3/2012
  • Product Detail
  • Company Profile

    Autobio iWO is a state of the art microplate washer, designed to meet the demanding requirements of today’s microplate based immunoassays.

    product highlights
    8- and 12-way manifold for 96-well microplates
    The high presision manifolds guarantee perfect washing performance in solid and strip plates. 80 plate geometries can be stored to optimize vertical and horizontal manifold positioning during washing. 96-well Flat-, U- and V-bottom plates are supported.

    Flexible wash procedure definition
    LUMO incorporates a sophisticated, adaptive positioning system, keeping the detector as close as possible above the sample to eliminate instrument related crosstalk and make optimum use of LUMOs high sensitivity and dynamic.
    Wash procedures are created as a sequence of previously configured wash cycles defining the desired parameters for:
    Aspirating with selectable duration and power. The crosswise aspirate feature guarantees minimal residual volume.
    Dispensing at high precision with variable volume and power.
    Washing can be performed either in bottom- or overflow wash mode. Shaking at selectable time, amplitude and speed is used to minimize bubbles and adherence of liquid to well surface.
    Soaking duration can be set as required and assures repeatible timing of each wash procedure.

    Up to 100 wash procedures and wash cycles can be defined and stored on iWO.
    Combined with the selection of the programmed plate type and wash liquid to be used with the asay perfect wash results are achieved.

    Priming and rinsing
    In order to facilitate maintenance and reduce the risk of clogging, priming and rinsing the system can be performed manually, automatic or periodic.

    One, two or four wash liquids
    Depending on the configuration iWO can connect to either one, two or four wash bottles and one waste bottle. The wash solution to be used is defined in the wash protocol. Optional liquid level detection for wash and waste bottels can be added to assures safer processing.

    Magnetic particle washing option
    A special plate carrier, available as option adds magentic particle washing ability to iWO. Together with the precisely adjustable washing and plate parameters optimum washing results for this sophisticated technology are acchieved.

    More features
    All relevant parts are easily accessible for cleaning and regular maintenance.
    Built in high performance pumps for quite operation. Vacuum and pressure free system.
    External Power supply for increased safety.

    Specifications  
    Plate Types 96-well microplates, 8- or 12-way strips
    Flat-, U- and V-bottom
    Manifold 8- or 12-channel (user exchangable)
    Liquid channels up to 4 wash channels, 1 waste channel
    Dispense volume 25-3500µl in increments of 25µl
    Dispense speed adjustable in 5 steps
    Dispense precision <2% CV at 300µl across the plate
    Residual volume <1µl (with flat bottom plate)
    Shaking time: 0-3600sec. in increments of 10sec.
    amplituide: adjustable in 10 steps
    speed: adjustable in 10 steps
    Aspiration
    time: 0 to 10sec. in increments of 0.1sec
    speed: adjustable in 5 steps
    Washing cycles 1 to 9 cycles
    Priming and rinsing manual, automatic, periodic
    Wash modes Bottom- and overflow washing
    Cross-aspirate function

    yes

    Wash procedures up to 100
    Wash cycles up to 100
    Plate setups up to 80
    Power supply 100-240VAC, 50-60Hz, 55VA24VDC output
    Display and keyboard 2x16 characters backlit display, keyboard with 5 function keys,power indicator
    Communication RS232
    Liquid level detectors
    yes (optional for wash/waste bottles)
    Dimensions 40 x 25,5 x 22,5cm (LxWxH)
    Weight 6,7kg net (without bottles)0,2kg per bottle
    Scope of supply Instrument, manifold (8- or 12-way), bottles, tubing, manual, power supply, power cord, user manual, assessories.
       
    Configurations  
    Art. No. Description
    201 100 08 iWO with one liquid line | 8-way manifold
    201 100 12 iWO with one liquid line | 12-way manifold
    202 100 08 iWO with two liquid line | 8-way manifold
    202 100 12 iWO with two liquid line | 12-way manifold
    204 100 08 iWO with four liquid line | 8-way manifold
    205 100 12 iWO with four liquid line | 12-way manifold
      alternative manifold available as option
    bio-equip.cn
    About Group
    Autobio is located at Zhengzhou, China and made up of Autobio Co., Ltd and Autobio Diagnostics Co., Ltd., which are all specialized in the field of providing solutions for clinical immunological diagnosis.

    With GMP certified facilities and experienced staffs, we have developed high-quality in vitro diagnostic reagents with the competitive price.

    In 2007 Autobio Labtec Instruments Co.Ltd. was founded, adding instrumentation to the product portfolio of the Autobio group. A close cooperation with an experienced R&D team in Europe and a highly qualified team in charge of production enables Autobio Labtec instruments to offer state of the art instrumentation to the domestic and international market.

    Autobio Co. Ltd.
    .. was established in 1998, as a company focusing on the sales and marketing of the range of diagnostic products developed and manufactured within Autobio group.

    Autobio Diagnostics Co. Ltd.
    ... was established in 1999, and has become one of the largest and fastest growing clinical diagnostic companies in China. We are specialized in research & development, production and distribution of clinical diagnostic products which mainly focused on CLIA, ELISA, microbiology and Rapid Test Strips/devices.

Request Information
Request Information: yes no
Request Quotation: yes no
refresh

I agree to share my inquiry with the other matching suppliers.

Request Information

* Name:
Job Title:
* Tel:
Fax:
* E-mail:
Postcode:
Institution/Company:
Address:
* Country:
Request Information:
yes no
Request Quotation:
yes no
* Message:
* Verification Code:
refresh
I agree to share my inquiry to the other matching suppliers.