The Push Cap Cappers CP600 & CP610 can cap the following Micronic Push Caps on 96-format tubes with internal thread (0.50ml, 0.75ml, 1.10ml, 1.40ml, 2.00ml and 2.50ml) in rack, TPE Capmats, Capbands and Capclusters, and EVA Capmats.
For your convenience the capper operates without any buttons. Simply pull the drawer out of the capper, place a rack filled with tubes on the drawer, and place the capmat, capband or capcluster on the tubes. Push the drawer inside the capper and the capping will start automatically.
Rack compatibility
Cycle time
Dimensions
Weight
Voltage |
: ANSI/SLAS standard 96-format racks
: On average 7 seconds
: 31 x 21 x 29 cm / 12 x 8 x 11 inch
: 14 kg / 31 lbs
: 115 - 230 V |
Superior features
▪No adapters required
▪Caps an entire rack of 96 tubes in an average of 7 seconds (depends on the tube height)
▪Operates without any buttons
▪Compact and robust design
▪Controlled pressure system for an evenly capping result
Works on full and partially-full racks
▪Compatible with the complete Micronic range of 96-format tubes and racks
▪Works with tube sizes up to 1.40ml (48mm)
Also compatible with other brands of tubes and caps (ask us for a compatibility list)
bio-equip.cn
中文
