The Mistral-Evolution nitrogen gas generator is specifically designed and built to meet the flow, purity, and pressure requirements of today’s LCMS systems.  It can also be used for the evaporation of solvents in samples being analyzed. The simple but well-proven pressure swing adsorption (PSA) technology is used to separate nitrogen from the other gases present in compressed air.

ADVANTAGES
The Mistral-Evolution family is optimized to generate nitrogen of constant purity for improved performance of analytical instruments, resulting in an overall  improvement in lab productivity. It is especially suited for LCMS, which requires a continuous supply of pure nitrogen which usually cannot be provided by gas tanks. With no gas tanks, there are no expenses related to gas supply, transportation, storage, and handling.  As an added benefit, the pure nitrogen produced at low pressure and room temperature eliminates the risks associated with high pressure gas bottles and the handling of liquid nitrogen.

The Mistral-Evolution is easy to install.  A 220V-50Hz (optional 110V-60Hz) power source is all that is required. The low noise of the instrument allows installation near the LCMS, but it can be located up to 30 meters away.

MODELS AVAILABLE
* Mistral-Evolution 10 Nl / min
* Mistral-Evolution 15 Nl / min
* Mistral-Evolution 25 Nl / min
* Mistral-Evolution 35 Nl / min
* Mistral-Evolution 40 Nl / min
* Mistral-Evolution Hybrid for the LCMS AB SCIEX
* Mistral-Evolution Gas-Station x Agilent AES 4100MP

MISTRAL EVOLUTION
The Mistral LCMS Evolution (PSA technology), which includes an integral oil-free air compressor, delivers a continuous stream of pure nitrogen gas of 98.5% at a flow rate of 40 Nl/min. It uses the pressure swing adsorption (PSA) system that removes oxygen, carbon dioxide, and water from compressed air. The resulting stream of pure nitrogen is ideal for LCMS techniques and other inert gas applications.

MISTRAL EVO HYBRID X LCMS AB SCIEX
The Mistral EVO Hybrid nitrogen generator was specifically designed to meet the flow, purity, and pressure requirements of the LCMS of AB SCIEX. The simple and proven pressure swing adsorption (PSA) technology is employed to remove nitrogen from compressed air. Selective molsieves (CMS) adsorb remaining oxygen and traces of humidity.

MISTRAL EVO GAS-STATION X AGILENT AES 4100MP
The new Mistral EVO Gas-Station is the global dedicated solution for the Microwave Agilent 4100MP system. The well-known and proven pressure swing adsorption (PSA) technology is used to simultaneously generate nitrogen and dry air -- the nitrogen with a purity >99.5% at up to 25 Nl/min, and the air at up to 40 Nl / min, suitable for POP and EGM. This combination allows the system to stabilize quickly and be ready faster. Thanks to a specialized insulation, the Mistral EVO Gas-Station can be installed in the laboratory near the instrument or underneath the laboratory bench.

MISTRAL EVOLUTION GAS-STATION x Agilent AES 4100MP

Models	MISTRAL EVOLUTION GAS-STATION
N2 Flow	Up to 25L/min at 8bar max
Air Gas Flow	Up to 40L/min at 8bar max
Purity	>99.5%
Voltage	110V/60Hz-230V/50Hz
Weight	110 kg net
Consumption	2500 W
Pressure accuracy	0.1 bar ( ±0.5% )
Display	Graphic Display,128×64px
Protection	IP2x
Temperature	From 15℃ to 40℃
Air dewpoint at operating pressre	-40℃
Noise	<60 dB
Alarm relay	250VAC,16A max
Outlet	rapid fitting for 6mm OD tube
Dimension ( mm )	482W×1235L×641H
Certification	CE, CSA, FCC

MISTRAL EVOLUTION HYBRID for the LCMS AB SCIEX

Models	MISTRAL EVOLUTION HYBRID
N2 Flow	Up to 12L/min at 80 psi
Source Air Gas	Up to 25L/min at 100 psi
Exhaust Air Gas	Up to 10L/min at 60 psi
Purity	>99%
Voltage	110V/60Hz-230V/50Hz
Weight	90 kg net
Consumption	1800 W
Pressure accuracy	0.1 bar ( ±0.5% )
Display	Graphic Display,128×64px
Protection	IP2x
Temperature	From 15℃ to 40℃
Air dewpoint at operating pressre	-40℃
Noise	<60 dB
Alarm relay	250VAC,16A max
Outlet	rapid fitting for 6mm OD tube
Dimension ( mm )	482W×835L×641H
Certification	CE, CSA, FCC

MISTRAL EVOLUTION Nitrogen Generators

Models	MISTRAL EVO 10L	MISTRAL EVO 25L	MISTRAL EVO 35L	MISTRAL EVO 40L
Flow rate ( L/min )	10	25	35	40
Pressure	Nitrogen Outlet: max 8 bar ( 116 psi )
Purity	From 99.0% to 99.9% at STP
Voltage	110V/60Hz-230V/50Hz
Weight	90 kg net
Consumption	1800 W
Pressure accuracy	0.1 bar ( ±0.5% )
Display	Graphic Display,128×64px
Protection	IP2x
Temperature	From 15℃ to 40℃
Noise	<60 dB (A)
Alarm relay	250VAC,16A max
Outlet	Nitrogen Outlet, rapid fitting for 6mm OD tube
Dimension ( mm )	482W×835L×641H
Certification	CE, CSA, FCC

 

Wiggens is a manufacturer of high quality laboratory equipment based in Beijing, China. We started out as distributor for laboratory equipment and soon became an exclusive distributor for most reputable lab equipment manufacturers. After being established as a well-respected and highly successful distributor all around China, we made the successful transition from a mere distributor to producing high level laboratory equipment itself.

Since 2006 we produce top-quality laboratory equipment and, by making use of our well- established distribution network, we were able to quickly establish our products in the domestic market.

Our two brands Wiggens and ChemVak stand for high quality, long durability, and remarkable performance.

Wiggens is your general laboratory companion and provides products that can be used in all kinds of laboratory environments. The Wiggens product range entails different kinds of magnetic stirrers and hot plates. It even provides hot plates with integrated stirring functions for an even heat distribution among your solvents. In addition to the magnetic stirrers Wiggens also provides overhead stirrers with diverse characteristics to perfectly match the solvent used. In addition, Wiggens offers homogenizers of different magnitudes as well as a broad range of shakers, multi- purpose heaters and colony counters. As a new feature in the 2014 range Wiggens now also provides incubators and water baths for full temperature control.

ChemVak on the other hand has been created as a brand specialized in vacuum equipment. Different kinds of vacuum pumps, including chemical-resistant diaphragm pumps and oil-free piston pumps, are complemented by vacuum filtration equipment to form whole filtration systems for a wide range of different applications. In addition, Water-jet aspirator pumps and bio-suction systems are part of the product range. In 2014, a new line of gas generators became part of the ChemVak product line and round out the picture of ChemVak as a specialist for vacuum and gas related operations.