Human Interleukin 37(IL-37) ELISA Kit,specification,price,image-Bio-Equip in China

Product Detail
Company Profile

Sample Types Validated:Serum, blood plasma,Saliva, Urine, and other related tissue Liquid.

FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.

Please read this insert completely prior to using the product. This kit is used to assay Human Interleukin 37(IL-37) on the basis of the Biotin double antibody sandwich technology. This Elisa kit takes one-step method with which solutions do not need diluting,because we simplifies the dilute process by our lab techniques. This kit is for research only and is not for use in diagnostic procedures.

Intended Use

This kit is used to assay the Interleukin 37(IL-37)in the sample of Human’s serum, blood plasma and other related biological liquid.

Test principle

This kit uses enzyme-linked immune sorbent assay (ELISA) based on the Biotin double antibody sandwich technology to assay the Human Interleukin 37 (IL-37). Add Interleukin 37(IL-37)to the wells, which are pre-coated with Interleukin 37(IL-37)monoclonal antibody and then incubate. After that, add anti IL-37 antibodies labeled with biotin to unite with streptavidin-HRP, which forms immune complex. Remove unbound enzymes after incubation and washing. Add substrate A and B. Then the solution will turn blue and change into yellow with the effect of acid. The shades of solution and the concentration of Human Interleukin 37 (IL-37) are positively correlated.

Materials supplied in the Test Kit

1	Standard solution(480ng/L)	0.5ml	7	Chromogen solution A	6ml
2	Standard dilution	3ml	8	Chromogen solution B	6ml
3	Coated ELISA plate	12-well * 8 tubes	9	Stop solution	6ml
4	Streptavidin-HRP	6ml	10	Instruction	1
5	Washing concentrate (30X)	20ml	11	Seal plate membrane	2
6	Anti IL-37 antibodies labeled with biotin	1ml	12	Hermetic bag	1

Materials required but not supplied

1. 37 ℃ incubator 2. Standard Enzyme reader

3. Precision pipettes and Disposable pipette tips 4. Distilled water

5. Disposable tubes for sample dilution 6. Absorbent paper

Important Notes

1. Before opening the kit kept at the temperature of 2-8℃, it takes at least 30 minutes to increase naturally to room temperature. After breaking the seal of ELISA coated-plate, some of the stripes used should be kept in hermetic bag.

2.When adding samples, sample injector must be used for each time and should also be frequently checked for its precision to avoid individual error.

3. The instruction must be strictly followed while the reading of ELISA reader must be set as the standard of determining the experiment result.

4.Pipette tips and seal plate membrane in hand should not be used more than once in order to avoid cross contamination.

5.All samples, washing concentration and wastes of every kind should be disposed as infective agent.

6.Other reagents not needed must be packed or covered. Reagents of different batches must not be mixed and should be used before their respective validity dates.

7. Substrate B is sensitive to light and therefore should not be exposed to light for too long.

Contact Rebecca Yan

Skype: span.biotech

Email: rebecca@spanbio.com

Tel: +86(755)89589611

Fax: +86(755)89580096

Web:

www.spanbiotech.com