Autobio iWO is a state of the art microplate washer, designed to meet the demanding requirements of today’s microplate based immunoassays.

product highlights
8- and 12-way manifold for 96-well microplates
The high presision manifolds guarantee perfect washing performance in solid and strip plates. 80 plate geometries can be stored to optimize vertical and horizontal manifold positioning during washing. 96-well Flat-, U- and V-bottom plates are supported.

Flexible wash procedure definition
LUMO incorporates a sophisticated, adaptive positioning system, keeping the detector as close as possible above the sample to eliminate instrument related crosstalk and make optimum use of LUMOs high sensitivity and dynamic.
Wash procedures are created as a sequence of previously configured wash cycles defining the desired parameters for:
Aspirating with selectable duration and power. The crosswise aspirate feature guarantees minimal residual volume.
Dispensing at high precision with variable volume and power.
Washing can be performed either in bottom- or overflow wash mode. Shaking at selectable time, amplitude and speed is used to minimize bubbles and adherence of liquid to well surface.
Soaking duration can be set as required and assures repeatible timing of each wash procedure.

Up to 100 wash procedures and wash cycles can be defined and stored on iWO.
Combined with the selection of the programmed plate type and wash liquid to be used with the asay perfect wash results are achieved.

Priming and rinsing
In order to facilitate maintenance and reduce the risk of clogging, priming and rinsing the system can be performed manually, automatic or periodic.

One, two or four wash liquids
Depending on the configuration iWO can connect to either one, two or four wash bottles and one waste bottle. The wash solution to be used is defined in the wash protocol. Optional liquid level detection for wash and waste bottels can be added to assures safer processing.

Magnetic particle washing option
A special plate carrier, available as option adds magentic particle washing ability to iWO. Together with the precisely adjustable washing and plate parameters optimum washing results for this sophisticated technology are acchieved.

More features
All relevant parts are easily accessible for cleaning and regular maintenance.
Built in high performance pumps for quite operation. Vacuum and pressure free system.
External Power supply for increased safety.

Specifications
Plate Types	96-well microplates, 8- or 12-way strips Flat-, U- and V-bottom
Manifold	8- or 12-channel (user exchangable)
Liquid channels	up to 4 wash channels, 1 waste channel
Dispense volume	25-3500µl in increments of 25µl
Dispense speed	adjustable in 5 steps
Dispense precision	<2% CV at 300µl across the plate
Residual volume	<1µl (with flat bottom plate)
Shaking	time: 0-3600sec. in increments of 10sec. amplituide: adjustable in 10 steps speed: adjustable in 10 steps
Aspiration	time: 0 to 10sec. in increments of 0.1sec speed: adjustable in 5 steps
Washing cycles	1 to 9 cycles
Priming and rinsing	manual, automatic, periodic
Wash modes	Bottom- and overflow washing
Cross-aspirate function	yes
Wash procedures	up to 100
Wash cycles	up to 100
Plate setups	up to 80
Power supply	100-240VAC, 50-60Hz, 55VA24VDC output
Display and keyboard	2x16 characters backlit display, keyboard with 5 function keys,power indicator
Communication	RS232
Liquid level detectors	yes (optional for wash/waste bottles)
Dimensions	40 x 25,5 x 22,5cm (LxWxH)
Weight	6,7kg net (without bottles)0,2kg per bottle
Scope of supply	Instrument, manifold (8- or 12-way), bottles, tubing, manual, power supply, power cord, user manual, assessories.
Configurations
Art. No.	Description
201 100 08	iWO with one liquid line | 8-way manifold
201 100 12	iWO with one liquid line | 12-way manifold
202 100 08	iWO with two liquid line | 8-way manifold
202 100 12	iWO with two liquid line | 12-way manifold
204 100 08	iWO with four liquid line | 8-way manifold
205 100 12	iWO with four liquid line | 12-way manifold
	alternative manifold available as option

About Group
Autobio is located at Zhengzhou, China and made up of Autobio Co., Ltd and Autobio Diagnostics Co., Ltd., which are all specialized in the field of providing solutions for clinical immunological diagnosis.

With GMP certified facilities and experienced staffs, we have developed high-quality in vitro diagnostic reagents with the competitive price.

In 2007 Autobio Labtec Instruments Co.Ltd. was founded, adding instrumentation to the product portfolio of the Autobio group. A close cooperation with an experienced R&D team in Europe and a highly qualified team in charge of production enables Autobio Labtec instruments to offer state of the art instrumentation to the domestic and international market.

Autobio Co. Ltd.
.. was established in 1998, as a company focusing on the sales and marketing of the range of diagnostic products developed and manufactured within Autobio group.

Autobio Diagnostics Co. Ltd.
... was established in 1999, and has become one of the largest and fastest growing clinical diagnostic companies in China. We are specialized in research & development, production and distribution of clinical diagnostic products which mainly focused on CLIA, ELISA, microbiology and Rapid Test Strips/devices.