All Steel Lab Side Bench/Table

All steel Laboratory table top uses solid core physiochemical board, cabinet body adopts 1.2mm cold-roll steel board, after treatment of pickling phosphating, epoxy resin stoving varnish. With reasonable structure, good load-bearing, flexible to assemble, easy to maintain and convenient to install and transport, it is the best choice for middle level and high level laboratory. The steel frames are all pickled and phosphorized and coated with epoxy resin powder, beautiful appearance, Modern, Resistant to acid-base.

Table top: adopting 12.7mm thick solid core physiochemical board, the surface is treated by technique, smooth without pores, acid-base resistance, anti-corrosion; the fringe is thickened to 25.4mm, and edge milling treatment, there is dropping waterfront, the anticorrosion, waterproof of Table Top all reach to high quality standards of laboratory industry.
Cabinet body: adopting 1.2mm thickness high quality cold-roll steel board, the interior is set one layer of removable shelf, and the shelf adopt 1.2mm thickness high quality cold-roll steel board, the outside is treated pickling phosphating, epoxy resin electrostatics powder coatings. bottom plate of lab cabinet is designed as full slice system，the back board of cabinet can be dismantled.
Door and drawer panel: adopt 1.2mm thickness high quality cold-roll steel board, the surface is treated pickling phosphating、epoxy resin electrostatics powder coatings, the structure is double-deck medium altitude reinforcement type.
Slideway: adopting high quality mute ball three section slide rail, no noise, high strength burden and open-close can reach to over 100,000 times.
Hinge: adopting high quality steel hingesm, opening angles from 110°to 175°, no noise, no springback, high strength and not break.
Handle: adopting integral forming groove handle or stainless steel handle, strong solid and elegant appearance.
Water Flume: adopting exclusive brands for lab, the water pool is PP flume, resistant to acid-base, with spec 500*400*300mm.
Test water faucet: adopting steeliness three outlet white/gray water faucets, the water faucet is nozzle tip type, high head, single mouth 360° rotation, is convenient for the multipurpose use, user dismant it to clean the blocking. Has the slow pressure function; the surface has epoxy resin spray coating, ceramic valve core; the outlet is dismantable, with formation thread inside, which is convenient to special water pipe.
Dropping water device: adopting PP water container, has function of blocking stink and prevent pipe blocking, and is easy to dismantled and maintained.
Double layer reagent rack: upright column adopts high quality square steel sections welding molding, spec is 40*100*1.5mm, surface is coated with epoxy resin powder, structure is strong solid, anti-corrosion and elegant appearance.
Reagent rack laminate: adopting high quality tempered glass, all around rim treatment, slick and not easy to hurt the hand. Equipped with glass supporting board and steel plate bending hook. It is free to adjust the height according to comfortable requests; edge is equipped with @12mm stainless steel pipe in order to prevent reagent bottle drop. elegant appearance and strong solid.
Socket: adopt Brand 220V/10A multifunctional socket.

Specifications (standard models)
Length width Height(Top)  Total height
2400 750   850            1550
3000 750   850            1550
3600 750   850            1550
4200 1500   850           1550
 

Flom Technology's searching for Products distributors globally!

Flom Technology is dedicated to Lab pretreatment instrumens that solely specialize in enviromental water treatment technology! Established in 2009, Qingdao Flom Technology Co., Ltd, is an distinguished innovative enterprise supported by China Government that integrated products R&D, manufacture,sales, and service. After going throught all these years’hard working, Flom Technology's developed up to 400 products into 10 categories totally including Laborotory pure water machine, ultrapure water machine, hemodialysis water purification system; EDI System; membrane separation system; Lab glassware washer/disinfector; ice making machine; effluent water treatment system, etc.Flom products are warmly welcomed and widely sold worldwide. Our service program covers all aspects for ensuring efficient & reliable processes in the lab and in production. Our experienced specialists will provide everything from installing and maintaining,ensuring your system remains cost-effective & delivers pure water during its entire life time. The widely applied fields includes Colleges,scientific research, laborotary, food, medical and hospital, pharmaceutical, etc.

Flom technology, since establishment in 2008, has obtained one after another qualification honors including ISO 9001 2008 certificate, State licence for medical treatment manufacture, CE certificate, etc. Flom has developed successfully domestic sales network in China and exported it's products to Middle East, South East Asia, India, Europe,Austrialia, etc. Flom Products are accepted and reputed for it's unique patent technology, Premium quality and aftersales service by the industry union, distributors and endusers.

We never stop in pursuiting of Innovation, high efficiency, energy saving and enviromental protection.

Well harness the Science,Aim for the top! Flom will be dedicated to providing the whole engineered solutions for users in all related industries and being one of the distinguished manufacturers and service providers of state of the art lab preliminary treatment instruments.

Qingdao Flom Technology Co.,Ltd is one high-tech enterprise integrating Product design, Manufacture, R&D, Sales and Service, we have got ISO9001:2008 and CE approved, with near 3000 square meters factory and over 60 staff.

Our products mainly includes Lab Water Purification System, EDI Module and EDI Lab Water Purification System, Lab Glassware Washer Disinfector, Lab
Membrane Separation System, Full Automatic Ice Maker, Water Softener, Industrial Water Treatment System like RO,EDI,UF,NF and MF,etc
Our products are widely applied into Scientific research, College and University, Disease control, Environmental protection, Chemical industry, Foods, Animal husbandry, Brewing industry, Soil test, Blood center, Hospital, etc.

FLOM products have been exported to over 10 countries since we started oversea business in 2010, and after year’s development, the customer service extends all over China, and involves into over 50 industry areas, covers over 50 mian cities of China.

"Efficient, Energy saving, Environmental protection" is our aim. we emphasize ourselves’ continuous development and innovation, we’re always working at providing the comprehensive laboratory solutions.