Revo™ Premier Protocol Development System,specification,price,image-Bio-Equip in China

Product Detail
Company Profile

•Opti-Dry Auto Controls can be used on any size Freeze Dryer from Laboratory to Production
•Reduce Development Times to Days
•Eliminates Guess Work
•Automatic Cycle Execution
•Conservative or Aggressive Cycles
•Results Based on Actual Measurements, Not Approximate Calculations
•Use 1 Vial to a Full Batch
•Works for 100% of the Primary Drying Cycle
•Dynamically Controls Shelf Temp
•Automatic Detection of the End of Primary Drying and Advancement to Secondary Drying
•One Year Free Software Upgrades
•Remote Monitoring and Support Optional FreezeBooster™ Nucleation Technology (Click for more information)

Optimize the Freeze Drying Cycle

We’ve combined the most sophisticated laboratory freeze dryer with the most powerful PC/PLC control system to enable One-Run Protocol development. Designed to automate and optimize the freeze drying cycle using Millrocks’ patent pending technique, the Revo™ provides all the tools you need to develop a robust protocol in as little as a single run.The Revo™ works with batch sizes from a single vial to a full load. The results are based on actual product temperatures, not batch averages, enabling the shelf temperature to compensate for the dynamic changes that occur throughout a freeze drying cycle. The result is the fastest cycle without melt-back or collapse.

Based on in-process product information, the Opti-Dry Auto control system will determine the proper freezing cycle, the proper vacuum level and shelf temperatures and then dynamically control the shelf temperature throughout the entire freeze drying cycle while maintaining a safe drying environment. The End of Primary Drying will automatically be determined using one or a combination of methods.Other protocol development systems require a large batch, use batch average data, and only work for a portion of primary drying, while the Opti-Dry Auto™ control system is active for the entire primary drying cycle. Opti-Dry Auto uses Millrocks’ patent pending ‘Critical Vial Method’ to control the shelf temperature from the warmest vial at all times, thus providing the maximum shelf temperature while eliminating the possibility of melt-back or collapse.

Revo™ Performance Specs

Shelf Area (sq ft)	6 or 8
Shelf Size and Finish	12” x 24” , 316L, 20 Ra or better
Shelf Temperature Range	–70C to +65C
Shelf Temperature Uniformity	+/- 1 C
Shelf Cooling Rate	20C to –40C in less than 30 min
Condenser Temperature	-85C
Condenser Capacity	30L
Condensing Rate	20L in 24 hours
Vapor Port	6”
Isolation Valve	6” Pneumatic
Compressors	Copeland Scroll, 3.5 and 2 HP
Vacuum Pull-Down	< 20 min to 100 mT
Vacuum Pump	Oerliken Leybold375 LPM, Corrosion Resistant
Vacuum Control	Pirani w/Solenoid & Needle ValveProportional Control Option
Vacuum Sensors	Pirani andCapacitance Manometer
Vacuum Level	5 mT or less
Vacuum Leak Rate	< 30mT/hr
Product Sensors	16 Type-T
Trays—Removable Bottom	One per Shelf Included
Cabinet	35”W x 45”D x 72”H
Electrical	230V/60Hz or 200V/50Hz, 1PH

Shelves

Model	Shelves	Area sq ft/sq m	Clearance in/mm
REV085S3	3	6 / 0.559	3.5 / 89
REV085S4	4	8 / 0.746	2.5 / 63

Vial Capacity (12″ x 24″ tray)

Vial	Diam	Ht	3	4
2 ml	16	41	2190	2290
5 ml	22	48	1194	1592
10 ml	24	58	1008	1344
20 ml	29	71	660

Bulk Capacty (liters)

Depth (mm)	3	4
10	5.4	7.2
15	8.1	10.8
20	10.8	14.4

Available Options

Proportional Vacuum Control
Shelf Latching Plates
Clean Room Configuration
Extended Warranty
Validation Documents
Water Cooled
Isolator Interface
Stainless Steel Doors

CM on Condenser
LN2 Trap
Acid Trap
IQ/OQ Workbook
FAT and SAT
Resistivity Probe
H2O2 Compatibility
Sample Thief

Optimize the Freeze Drying Cycle

For a complete list and comparison of all our Freeze Dryers, please visit our main Freeze Dryer page.