1. The vacuum environment greatly reduced the liquid boiling point which needs to drive out,therefore the vacuum is dry may with ease apply to heat sensitivity material
2. For the sample that does not be dry easily,such as powder or other pellet form sample,using vacuum dry method may efficiently shorten dry time.
3. Various structures are complex the or other porous sample process of machinery ministry uses vacuum dry function after washing,have no any remnant quality after being dry completely.
4. Use more safety-under vacuum or inertia condition,eliminate oxide completely to meet the possibility of hot explosion.
5. With dependence air cycle ordinary is dry to compare,powder form sample will not be flowed,air blows or moves.
Though,vacuum dry technology has more numerous advantage,but it is more strict that the workmanship of drying oven compares with the relatively complex requirement for product quality with ordinary oven. A permanent company's accurate Kong Wen technical and advanced work manship,the product of guaranteeing us may satisfy your needs.
The overall vacuum cycle that vacuunm dry process control may offer program to melt need to set hightest and minimum vacuum degree value respectively according to your requirement,may shorten dry time further.For instance:Through program control vacuum cycle,set minimum vacuum degree 50Pa and biggest vacuum degree 90Pa,circulating frequency is six,if by dry,picture shows process.Along with each cycle go on,humidity reduces constantly,dry speed accelerates obviously.Biggest circutating frequency mayreach ninety-nine times.
Features
1.Cuboid chamber maximizes the effective cubage.Microprocessor controller for temperature ensures a precise and reliable control.
2. Dual-layer bullet proof toughened glass door ensures absolutely clear observation on objects in chamber.
3. Shutting extent of oven door is adjustable.Closed-cellsilicon gasket ensures a high vacuum degree in oven.
4. The chamber is made of stainless steel(or wire-drawing sheet),which allows a durable service.
5. Storage,heating,testing and drying are all in an environment without oxygen or filled with inert gases,which ensures no oxidation.
6. Minimum heating time is over 50% less than that of traditional vacuum drying oven.
Vacuum drying oven adopts the digital technical control vacuum degree of simulated engineering science,"control by hand"becomes historicallong age.You return think the today lever operating valve of by hand in 21 century may control vacuum degree accurately?
Through electromagnetism valve full automatic number the vacuum degree that shows control,foryou,offer the vacuum degree control that has effective accuracy more,hope more offer to give your is more up to date information and more conveniences.Pass through panel,vacuum degree from 20Par is adjustable to 9999Pa,adjustable precision is 1Pa.Panel shows vacuum degree scope for 1Pa,is to 9999Pa.Vacuum sensor is located in and enters angry mouth and the diffenent location of gas outlet,so,the pressure of having guaranteed to stabilize pressure value,not be bullied the influence that flows the most steady pressure value to the operating panel.
Specifications
ModelModel | Electircal Requirements | Input Power | Temperature Range | Temperature Control | Temperature Stability | Vacuum Degree | Interior Dimension
(mm)W×D×H | Overall Dimension
(mm)W×D×H | Shelves per Chamber | Chamber Material |
BPH-6210LC | 220W 50Hz | 2060W | RT+10~200℃ | 0.1℃ | ±1℃ | 133Pa | 560×600×640 | 720×820×1750 | 3pcs(Intependent temperalute control) | Stainless steel
(1Cr18Ni9Ti) |
BPH-6123LC | 1400W | 500×500×500 | 610×680×1460 | 4(pcs) |
BPH-6090LC | 1150W | RT+10~200℃ | 450×450×450 | 2pcs(intependent temperature control) |
BPH-6063LC | 400W | 400×400×400 | | 3(pcs) |
| BPH-6033LC | | 400W | 320×320×320 | | 2(pcs) |
bio-equip.cn
中文
