Gel Electrophoresis Tank

Introduction:
The AE-verMINI cell is dual vertical electrophoresis system performs vertical gel electrophoresis on mini-format gels. The basic unit includes electrophoresis modules, casting stand and glass plates with permanently bonded gel spacers that simplify hand casting and eliminate leaking during casting, Each module holds one gel sandwich, 10 cm wide and up to 10.5 cm long. One gel can be cast in place on each electrophoresis module.
A wide range of accessories, ordered separately, lends the AE-verMINI a high degree of versatility. These include: a large selection of combs and spacers and a blot module, to convert the AE-verMINI into a mini blotting unit.
The apparatus also comes with a safety lid with attached power cords and unique gel caster system for leak proof casting.

Features:
1.It can be used for gel of two sizes: 83x97mm longer and 83x73mm mini. Lengthened gel is suitable for SSCP and EMSA, and it is high sensitivity.
2. Situ Glue: Patent inclined cam glue can make gel in electrophoresis core, then you can move the gel into the slot without moving the glue glass, thus we can avoid the mistakes that may occur in the process of moving the glue glass.
3. Electrophoresis Comb: 1.0mm thick, 9, 10, 15 and 18 well (standard configuration)
0.75mm thick, 10 and 15 well, 1.5mm thick, 10 and 15 well
4.The 1 cm space under the bottom can be placed on the magnetic particles stick to stir, so that the temperature and ionic strength of the buffer can be uniform, and the electrophoresis results can be more accurate.
5.The glass is surrounded by scrub, and the notch at the arc-shaped grinding.
6. Special electrophoresis comb does not inhibit gel polymerization, and avoid the contact with air to ensure that the aggregate homogeneity.
7. The way of adding samples can avoid missing or duplicate.
8. The cathode structure of electrode is V-shaped, and there are air bubbles holes on both sides of it. They can ensure that there will be no bubble lifetime and the full contact of the electrode and the buffer during electrophoresis.
9. The excellent cooling effect can support the 300V rapid electrophoresis, not only can avoid the embarrassment of user-made “ice basin”, but also can avoid the “smiley face” phenomenon during electrophoresis.
10. Rugged bold platinum (∮0.25mm)
11. The less liquid board can adjust the volume of the buffer according to the experiment.
12. It is equipped with multifunctional skid rubber feet.

Main specifications:

Model	AE-verMINI
Gel size	standard configuration: 83x97mm; optional is 83x73mm
Glue quantity	1 to 2
On slot buffer	200ml
The following slot buffer	800ml
Comb specifications	1.00 thick, 9/10/15/18 well; 0.75mm thick, 10/15well; 1.5mm, 10/15 well.

This is the gel electrophoresis tank, need to work with power supply model. We suggest model AE-POWER300, AE-POWER600 and AE-POWER600I.

 

By the way, besides this model, we also have bigger size vertical type and horizontal type, also have transfer electrophoresis tank.

A&E Lab company has many years of manufacturing and selling wide range of scientific & laboratory instruments. Our main products include: UV Visible spectrophotometer, visible spectrophotometer, PCR, Melting point apparatus, gel electrophoresis system, gel imaging system, freezer dryer, stirrer hotplate, shaker, rocker, block heater, mixer etc.

We have gained ISO certification. And most of our goods have been CE certificated and guarateen by warranty. The instruments are greatly used by laboratory technicians, scientists, physicians, teachers and researchers, and always being good helpers to their labs.

Payment terms, T/T, Western Union, Moneygram, Paypal etc.