All Steel Fume Hood
Structure combination：Using three parts combined type cabinets, the upper cabinet(fume cabinet), middle( worktop), nether cabinet(contains single side independent extract type combined cabinet and the other side independent water, electricity, gas pipeline system contained cabinet ). The material is high quality stainless steel sheet, with thickness≥1.2mm. (containing cut surface, screw hole), the thickness and quality of powder coating can meet National standards, adhesion is good, the appearance is smooth, the whole body has strong anti-corrosion.
1) Cabinets body: using high quality 1.2mm galvanized cold-rolled steel sheet to press into moulding, the surface treated by high temperature solidify via epoxy resin plastic powder.
2) Worktop: is made up of 12.7mm thickness solid core physiochemical board for lab special use, the around is thickened to 25.4mm, can resist90% strong acid, strong alkali, resist high temperature≧1200℃, the top around is double layer to prevent the liquid overflow, the water glass is set up in the right behind side of the door.
3) lining board, deflect guide board: using 6 mm thickness compact grade board after epoxy resin static spray coating treatment, the installed position and angle need to make the exhaust distribute even, without dead angle, in standard situation, the exhaust capacity between the upper air outlet of deflect guide board with the middle, nether ones is 50±10% respectively, to make sure different rate gas removed efficiently, with manual adjustable exhaust capacity rate design，can improve the exhaust capacity rate of the middle, nether air outlet over 80%.
4) Top board, power supply: using special designed 10A or 16A three-stage Multi-function socket, with design of dustproof, anti-acid-base, anti-water; and is equipped with electricity-protection switch, effectively ensure the safety of person and equipment.
5) Lighting: non-visual light source, there is 30W explosion-proof type daylight lamp equipped in the top board, ensure the worktop is not lower than the height standard of 450LUX, is not touch with the gas in cabinets, and is easy to be replaced.
6) Sliding door: double hanging type glass door, the material is steel-made frame with 6mm tempered glass, open in up or down, the operation is convenient and flexible, the bottom of sliding door should have rubber shockpad to reduce the pound when on-off. stepless balance weight, up or down is free when slide door, can be stopped in each position.
7) Transmission: double hanging glass door is transferred in-phase by guide rail, bob-weight pulleys, tight wire, bob-weight, open in up or down is open convenient and flexible with low noise.
8) Working top wind speed: 0.5～0.8m/s.
9) Exhaust capacity: 1080～1400m3/h.
10) Exhaust resistance: 5～12mmH2O.
11) Working Voltage: AC220V～380V.
12) Electromotor power: 0.04～2.2kw.
13) air valve: using coppery surface which is treated by EPOXY, is anti-high pressure, acid-base resistance, anti-hot material, single mouth separate operation style.
14) Electrical accessories: versatile sockets(220V/10A),daylight lamp, fan on-off control.
15) Air outlet measurement: Φ250mm.
16) Fan: using fiber glass (FRP)material, acid-base resistance, weathering resistance.
17) Air pipe: using high quality PVC air pipe,(the measurement depends on site).
Standard Models
Measurement 1200mm L*D*H 1500mm L*D*H 1800mm L*D*H
Outside Measurement 1200*850*2350 1500*850*2350 1800*850*2350
Inside Measurement 990*750*1205 1290*750*1205 1590*750*1205
Under cabinet Measurement 1200*650*860 1500*650*860 1800*650*860
Top Height 860 860 860
ventilation door open height 650 650 650
Recommended top wind speed: At the place of 60% ventilation door open height, the fume hood recommended average wind speed is not less than 0.5meter/second bio-equip.cn Flom Technology's searching for Products distributors globally!
Flom Technology is dedicated to Lab pretreatment instrumens that solely specialize in enviromental water treatment technology! Established in 2009, Qingdao Flom Technology Co., Ltd, is an distinguished innovative enterprise supported by China Government that integrated products R&D, manufacture,sales, and service. After going throught all these years’hard working, Flom Technology's developed up to 400 products into 10 categories totally including Laborotory pure water machine, ultrapure water machine, hemodialysis water purification system; EDI System; membrane separation system; Lab glassware washer/disinfector; ice making machine; effluent water treatment system, etc.Flom products are warmly welcomed and widely sold worldwide. Our service program covers all aspects for ensuring efficient & reliable processes in the lab and in production. Our experienced specialists will provide everything from installing and maintaining,ensuring your system remains cost-effective & delivers pure water during its entire life time. The widely applied fields includes Colleges,scientific research, laborotary, food, medical and hospital, pharmaceutical, etc.
Flom technology, since establishment in 2008, has obtained one after another qualification honors including ISO 9001 2008 certificate, State licence for medical treatment manufacture, CE certificate, etc. Flom has developed successfully domestic sales network in China and exported it's products to Middle East, South East Asia, India, Europe,Austrialia, etc. Flom Products are accepted and reputed for it's unique patent technology, Premium quality and aftersales service by the industry union, distributors and endusers.
We never stop in pursuiting of Innovation, high efficiency, energy saving and enviromental protection.
Well harness the Science,Aim for the top! Flom will be dedicated to providing the whole engineered solutions for users in all related industries and being one of the distinguished manufacturers and service providers of state of the art lab preliminary treatment instruments.
Qingdao Flom Technology Co.,Ltd is one high-tech enterprise integrating Product design, Manufacture, R&D, Sales and Service, we have got ISO9001:2008 and CE approved, with near 3000 square meters factory and over 60 staff.
Our products mainly includes Lab Water Purification System, EDI Module and EDI Lab Water Purification System, Lab Glassware Washer Disinfector, Lab
Membrane Separation System, Full Automatic Ice Maker, Water Softener, Industrial Water Treatment System like RO,EDI,UF,NF and MF,etc
Our products are widely applied into Scientific research, College and University, Disease control, Environmental protection, Chemical industry, Foods, Animal husbandry, Brewing industry, Soil test, Blood center, Hospital, etc.
FLOM products have been exported to over 10 countries since we started oversea business in 2010, and after year’s development, the customer service extends all over China, and involves into over 50 industry areas, covers over 50 mian cities of China.
"Efficient, Energy saving, Environmental protection" is our aim. we emphasize ourselves’ continuous development and innovation, we’re always working at providing the comprehensive laboratory solutions.
|
中文
