MINIFOR Bireactor: 

The LAMBDA MINIFOR bench-top laboratory fermenter and bioreactor was developed as a result of the need to construct a small laboratory fermentor for volumes from 35 ml to over 6 liters. Based on long personal practical experience of fermentations, we wanted to create a fermentor, which was easy to use and with the capacity to measure and control all the important parameters of the fermetation. 

• Instead of a fermentor flask with a stainless steel cover, which is expensive, we use whole glass vessels with threaded fittings. They have been used for many years in cell culture and are proved to maintain perfect sterility. Thanks to this concept, the MINIFOR fermenter-bioreactor is set up in shortest possible time.
• Instead of a traditional propeller agitator, which requires an expensive motor and magnetic coupling, we have introduced a new up-and-down agitation. A motor together with an inexpensive membrane perfectly assure sterility and produce an efficient mixing without formation of a vortex (no baffles needed). At the same time this type ofhttp://lambda-instruments.in/index.php/products/bioreactor-fermentor-overview mixing is gentler on cells and produces less foam. Novel biomimicking “fish-tail” stirring discs offer maximum mixing efficiency without cutting edges.
• The culture is heated by heat radiation produced in a parabolic radiator with a gold reflector placed under the fermentation vessel. The heat is absorbed gently in the culture similarly to the sun heating water. There is no overheating of the culture at any volume and expensive double-wall vessels with thermostatic baths are eliminated. At the same time tubing and cables disappear making the fermentor less complex.
• As far as possible, expensive pieces of equipment has been replaced by new high performance plastics.
• By using modern microprocessors, it has been possible to place all the electronics in the front part of the instrument. This makes the fermentorunbelievably compact and eliminates the casing tower. Despite its small size six parameters are measured and controlled in the basic configuration of the MINIFOR.

Documents：

Leaflet-LAMBDA-MINIFOR-laboratory-fermentor.pdf

Innovative Laboratory-scale Bioreactors — Overview and Benefits of LAMBDA MINIFOR

Bench-top Laboratory Fermentor-Bioreactor LAMBDA MINIFOR - Operational manual

LAMBDA MINIFOR laboratory fermenter and bench-top bioreactor at universities and high schools

LAMBDA MINIFOR laboratory fermenter and bioreactor - the solitary teamplayer in parallel processes

LAMBDA Peltier electronic cooling loop for Minifor fermenter-bioreactor

LAMBDA REDOX potential measurement for MINIFOR laboratory fermenter-bioreactor

LAMBDA INTEGRATOR replaces the need for optical density measurements in fermenters and bioreactors

How to compare the cost and real value of a laboratory fermentor-bioreactor

Fermentor control software

 

LAMBDA Laboratory Instruments develops innovative, high quality laboratory instruments with an excellent price to performance ratio:
laboratory fermenters, bench-top fermentors, bioreactors for cell culture, peristaltic pumps, tubing pumps, infusion pumps, syringe pumps, fraction collectors, samplers, powder dosing instruments, mass flow gas controllers and fermentation software for biotechnology, microbiology, food and agricultural, chemical and pharmaceutical research and development as well as for educational and general laboratory applications.

Personal lab experience is essential for making good laboratory instruments. We love to construct them for you with the same care, as we would do them for ourselves, therefore our instruments are practical, economical and use inventive ideas not found elsewhere

Low cost and high quality are not always contradictions

By visiting our pages www.lambda-instruments.com you will see that we always concentrate on the essential.

LAMBDA Laboratory Instruments - where innovation keeps quality high and prices low