1, Specification
|
Model Features
|
Two-stage RO Purificatoin
|
|
Model
|
CSJM-RRO
|
|
Feed water requirements *
|
Tap water: TDS<200 ppm, 5-45 °C, 1.0-4.0 Kgf/cm2 (Additional Water softener recommend when TDS>200 ppm )
|
|
Process Flow**
|
PF+KDF+AC+RO+RO+AC
|
|
RO Water
|
First stage RO water (TDS): Conductivity ≈ 5% source water conductivity; Second stage RO water (TDS): 1-5 µs/cm (conductivity≤% source water conductivity); Organic contaminants rejection>99% (when MW>200 Dalton); Particulates and bacteria rejection>99%
|
|
DI highly purified water
|
RQ Series: Resistivity: 16-18.2 mΩ•cm, heavy metal ions<0.1 ppb, bacteria <0.1 cfu/ml, particulates(>0.2μm)<1/ml
|
|
Ultra-purified water
|
R Series: Resistivity: 18.2 mΩ•cm (25°C), heavy metal ions<0.1 ppb, bacteria <0.1 cfu/ml, particulates(>0.2μm)<1/ml, TOC<10 ppb ***, (UV/UVF Series: TOC<3 ppb***)
UF/UVF Series: Pyrogen<0.001 Eu/ml, RNases<0.01 ng/ml, DNases<4pg/μ
|
|
Water production rate (25°C) ***
|
15-20 L/h
|
|
Second stage instant dispensing rate
|
2.0 L/min
|
|
Water Outlets
|
Two: Stage I, II RO water
|
|
Dimensions
|
W*D*H: 500*360*540 mm, about 30 kg
|
|
Power supply/Power
|
220V/50Hz, 120W
|
|
Standard system configuration
|
Water Purification Unit (with one set of purification modules), Tank Set (internal water level tank ×1 + 15 L external pressure tank × 1), accessories
|
|
Model Features
|
Two-stage RO and DI purification
|
|
Model
|
CSJM-RQ
|
|
Feed water requirements *
|
Tap water: TDS<200 ppm, 5-45 °C, 1.0-4.0 Kgf/cm2 (Additional Water softener recommend when TDS>200 ppm )
|
|
Process Flow**
|
PF+KDF+AC+RO+RO+AC+DI+TF
|
|
RO Water
|
First stage RO water (TDS): Conductivity ≈ 5% source water conductivity; Second stage RO water (TDS): 1-5 µs/cm (conductivity≤% source water conductivity); Organic contaminants rejection>99% (when MW>200 Dalton); Particulates and bacteria rejection>99%
|
|
DI highly purified water
|
RQ Series: Resistivity: 16-18.2 mΩ•cm, heavy metal ions<0.1 ppb, bacteria <0.1 cfu/ml, particulates(>0.2μm)<1/ml
|
|
Ultra-purified water
|
R Series: Resistivity: 18.2 mΩ•cm (25°C), heavy metal ions<0.1 ppb, bacteria <0.1 cfu/ml,particulates(>0.2μm)<1/ml, TOC<10 ppb ***, (UV/UVF Series: TOC<3 ppb***)
UF/UVF Series: Pyrogen<0.001 Eu/ml, RNases<0.01 ng/ml, DNases<4pg/μ
|
|
Water production rate (25°C) ***
|
15-20 L/h
|
|
Second stage instant dispensing rate
|
2.0 L/min
|
|
Water Outlets
|
Two: Stage II RO water, DI water
|
|
Dimensions
|
W*D*H: 500*360*540 mm, about 30 kg
|
|
Power supply/Power
|
220V/50Hz, 120W
|
|
Standard system configuration
|
Water Purification Unit (with one set of purification modules), Tank Set (internal water level tank ×1 + 15 L external pressure tank × 1), accessories
|
|
Model Features
|
Two-stage RO ultra-purification
|
|
Model
|
CSJM-R /UF /UV /UVF
|
|
Feed water requirements *
|
Tap water: TDS<200 ppm, 5-45 °C, 1.0-4.0 Kgf/cm2 (Additional Water softener recommend when TDS>200 ppm )
|
|
Process Flow**
|
PF+KDF+AC+RO+RO (+UV)+AC+DI(+UF)+TF
|
|
RO Water
|
First stage RO water (TDS): Conductivity ≈ 5% source water conductivity; Second stage RO water (TDS): 1-5 µs/cm (conductivity≤% source water conductivity); Organic contaminants rejection>99% (when MW>200 Dalton); Particulates and bacteria rejection>99%
|
|
DI highly purified water
|
RQ Series: Resistivity: 16-18.2 mΩ•cm, heavy metal ions<0.1 ppb, bacteria <0.1 cfu/ml, particulates(>0.2μm)<1/ml
|
|
Ultra-purified water
|
R Series: Resistivity: 18.2 mΩ•cm (25°C), heavy metal ions<0.1 ppb, bacteria <0.1 cfu/ml, particulates(>0.2μm)<1/ml, TOC<10 ppb ***, (UV/UVF Series: TOC<3 ppb***)
UF/UVF Series: Pyrogen<0.001 Eu/ml, RNases<0.01 ng/ml, DNases<4pg/μl
|
|
Water production rate (25°C) ***
|
15-20 L/h
|
|
Second stage instant dispensing rate
|
2.0 L/min
|
|
Water Outlets
|
Two: Stage II RO water, ultra-pure water
|
|
Dimensions
|
W*D*H: 500*360*540 mm, about 30 kg
|
|
Power supply/Power
|
220V/50Hz, 120W
|
|
Standard system configuration
|
Water Purification Unit (with one set of purification modules), Tank Set (internal water level tank ×1 + 15 L external pressure tank × 1), accessories
|
2, Features
Fed tap water,produces ultra-pure water with conductivity of 1-5 μS/cm at 15-20 L/h,even if the source water is of relative poorer quality.Two-stage reverse osmosis system has with dual pumps,dual RO membranes，and a middle tank.Compared with single-stage system,two-stage RO purification system will not only produce purified water with more stable quality,but also reduce the cost of subsequent purification modules.
Applications
1) Glassware washing
2) Spectrometry measurements
3) DNA sequence analysis
4) Sample dilution and reagent preparation
5) Microbiological analysis
6) Buffer and media preparation
7) Electrophoresis,gel analysis
8) General Chemistry and Qualitative Analysis
9) TOC analyses,IC
10) HPLC/GC-MS/ICP-AES
11) Mammalian Cell Culture
12)Water analysis and general HPLC
bio-equip.cn Haier Bio-Medical is subsidiary of Haier Group China.
Haier Group is a global leading networked home appliance & furnishing supplier and virtual-real distributor .Founded in Qingdao, China in 1984, Haier has grown from a small plant close to bankruptcy into a global group with an annual turnover of 163.1 billion yuan (2012). It has five R & D centers, 61 trade companies, 21 industrial parks and over 80,000 employees worldwide, with its customers spread in over 100 countries and regions. According to the data released by Euromonitor, an authoritative consumer market survey agency, Haier has topped the list of global home appliance brands for four consecutive years and ranked 8th on the list of the "Most Innovative Companies 2012" released by The Boston Consulting Group.
Haier Medical and Laboratory Products Co., Ltd was founded in 1998, is based in China. We design, manufacture and market laboratory equipment for the global market. Our products are designed to enable scientific researchers across the globe to perform research projects and to produce pharmaceutical products.
〓Our Products〓
★ ultralow temperature freezers
★ blood banks
★ pharmacy refrigerators
★ ice-lined vaccine refrigerators
★ laboratory freezers
★ bio-safety cabinets
★ equipment for the laboratory and medical applications
Installations can be found in blood banks, hospitals, epidemic prevention services, universities, pharmaceutical manufacturers, and national laboratories. The successful growth of our business drove a continuous development of our manufacturing ability. Along with many state of the arts manufacturing equipment, we added a facility of 56,700 square meters in 2001 to meet the increasing demand of our customers.
Headquartered in Qingdao, China, our company is a part of Haier Group Company which is highly ranked as one of the key global manufacturers of durable goods.
〓Certification〓
★ ISO9001 quality system
★ ISO14001 environment protection system
★ ISO13485:2003 quality system
People’s Republic of China Medical Device Manufacturing Enterprise License People’s Republic of China Medical Device Registration Record Medical Device For Medical Device Category A,B and C from the State Food and Drug Administration
Our research and development team consists of highly qualified and selective professionals specialized in registration technology, control technology, remote sensing, sample protection and handling, networking technology.
Our business strategy and technological advancement have been very effective since the founding of the company. We now have shipped products to clients in over 100 countries.
|
中文
