Technical Parameters
Turnkey Project: The equipment sale&installation&service
Raw water source: Underground water
Raw water design temperature: 25℃
Analysis of raw water: non-water report, raw water TDS ≤650PPm.
Total inflow of system: 7.5m3/h
The System water production: 5.0m3/h@25℃
Producing water quality: ≤2μs/cm@25℃
The system recovery rate: 45~70%
Water making process: Electrodialysis + Mixed bed(ion exchange)
Inlet water__Raw water tank___Raw water pump__ Multimedia filter__Security filter__ Electrodialysis device—Middle water tank__pure water pump__Mixed bed ion exchange__Pure water tank__ Point of water
Raw water tank, Liquid level controller, Inlet water solenoid valve, Raw water pump, Multimedia filter, Pipelines, valve, Security filter, Electrodialysis, Middle water tank, Liquid level controller of Middle water tank, Pure water pump, Mixed-bed exchanger, Pure water tank, Liquid level controller of pure water tank, Conductivity Monitor.
Tehnical Process Introduction
Electrodialysis works using permeability of ion-exchange membrane, its key component is ion exchange membrane. Ion exchange membrane of electrodialyzer has Selective permeability to anion and cation under the direct-current field function. namely cation can permeate cation menbrane, while anion can permeate anion membrane. compartment, composed of partition board and membrane, anion in thin room will move toward positive pole to pass through cation membrane, and is blocked in thick room, while cation will move toward negative pole to pass through anion membrane, and is blocked in thin room, from this liquor in thin room can desalinate, liquor in thick room increases density, thus achieves the destination to desalination, purification, concentration.
Mixed bed, is taking anion and cation resin in the same exchanger according to some certain proportion before the movement, makes it homogeneous mixed. At the moment after passing Mixed-bed ion-exchange, H+ OH- produced by treated water generate into low-solubility water. as ultra purified device of the process terminal, may make the terminal water’s resistivity reach over 15MΩ. cm, can meet users’ high quality water requirements.
* Project analysis: Raw water quality analysis, construction requested analysis;
* Standards of drinking water;
* The solutions of ultrapure water: Instructions of ultrapure water process, detailed flow chart;
* Construction solutions;
* Equipment technical parameters;
* System layout and technical parameters;
* Equipment quotation;
* Mode of payment;
bio-equip.cn Flom Technology's searching for Products distributors globally!
Flom Technology is dedicated to Lab pretreatment instrumens that solely specialize in enviromental water treatment technology! Established in 2009, Qingdao Flom Technology Co., Ltd, is an distinguished innovative enterprise supported by China Government that integrated products R&D, manufacture,sales, and service. After going throught all these years’hard working, Flom Technology's developed up to 400 products into 10 categories totally including Laborotory pure water machine, ultrapure water machine, hemodialysis water purification system; EDI System; membrane separation system; Lab glassware washer/disinfector; ice making machine; effluent water treatment system, etc.Flom products are warmly welcomed and widely sold worldwide. Our service program covers all aspects for ensuring efficient & reliable processes in the lab and in production. Our experienced specialists will provide everything from installing and maintaining,ensuring your system remains cost-effective & delivers pure water during its entire life time. The widely applied fields includes Colleges,scientific research, laborotary, food, medical and hospital, pharmaceutical, etc.
Flom technology, since establishment in 2008, has obtained one after another qualification honors including ISO 9001 2008 certificate, State licence for medical treatment manufacture, CE certificate, etc. Flom has developed successfully domestic sales network in China and exported it's products to Middle East, South East Asia, India, Europe,Austrialia, etc. Flom Products are accepted and reputed for it's unique patent technology, Premium quality and aftersales service by the industry union, distributors and endusers.
We never stop in pursuiting of Innovation, high efficiency, energy saving and enviromental protection.
Well harness the Science,Aim for the top! Flom will be dedicated to providing the whole engineered solutions for users in all related industries and being one of the distinguished manufacturers and service providers of state of the art lab preliminary treatment instruments.
Qingdao Flom Technology Co.,Ltd is one high-tech enterprise integrating Product design, Manufacture, R&D, Sales and Service, we have got ISO9001:2008 and CE approved, with near 3000 square meters factory and over 60 staff.
Our products mainly includes Lab Water Purification System, EDI Module and EDI Lab Water Purification System, Lab Glassware Washer Disinfector, Lab
Membrane Separation System, Full Automatic Ice Maker, Water Softener, Industrial Water Treatment System like RO,EDI,UF,NF and MF,etc
Our products are widely applied into Scientific research, College and University, Disease control, Environmental protection, Chemical industry, Foods, Animal husbandry, Brewing industry, Soil test, Blood center, Hospital, etc.
FLOM products have been exported to over 10 countries since we started oversea business in 2010, and after year’s development, the customer service extends all over China, and involves into over 50 industry areas, covers over 50 mian cities of China.
"Efficient, Energy saving, Environmental protection" is our aim. we emphasize ourselves’ continuous development and innovation, we’re always working at providing the comprehensive laboratory solutions.
|
中文
