·Introduction
The constant temperature bath is comprised of a bath and a high precision thermostat which combines the microprocessor and the PID technique.
The constant temperature bath widely used in industries such as petroleum, chemical, medicine, biochemistry, metrology and other light industries and scientific research etc.

·Features
·Control Panel
Digital display,easy setting and operating,adjustable temperature,alarm signal display.
·Advanced Thermostatic Controller
High temperature control accuracy up to 0.02.Wide temperature control range,temperature controlling and setting at will in the range of 10-95 at room temperature.
·Circulation system
The bath is fitted with a powerful jet-pump for agitating and has joints connected with the external circulation system through which the liquid inside the bath can be exported to an outside apparatus to thermostatically control the external circulation. Similarly, inside the bath are separate circulating pipes through which the liquid used by the external experiment is circulated to enable thermostatic control without mixing with the liquid in the bath.
·Safety features

Low liquid level protection
If the water level is too low the heating pipe will shut off and the alarm light will illuminate.

Temperature out of control
If the temperature exceeds the preset level by 2℃ during the thermostatic process the heating pipe will shut off and the alarm light will illuminate.

Over current protection
If the electrical current is exceeded during the course of operation the internal fuse will blow thereby protecting the apparatus and the operator.

·Specifications

型 号参 数	N1 － 2C
Temp. Control Range	（ Room temperature ＋ 10 ℃～ 95 ℃）
Temp. Control Accuracy	± 0.02 ℃ （ Water temperature 40 ℃）
Heater	1000 W
Heater time	< 80 min (From room temperature20 ℃ to 95 ℃ )
Input A.C. Voltage	AC220 ± 22V 50 ± 1Hz
Input power	1100 W
Insulation resistor	≥ 1.5 M W
Dielectric intensity	Tested by AC Voltage of 50Hz,sine wave, 1500V for 1 minute, no flashover detected.
Internal dimension (L×W×H)(mm)	130× 95×170 （ L ×W ×H ）
Bath liner Dimension (L×W×H)(mm)	260×160×170 （ L× W×H ）
Dimension (L×W×H)(mm)	420×234×428 （ L ×W×H ）
External circulation	The jet and circumfluence hole diameter: ?10mm
Cooling pipe interface dimension	Ф10mm
Net weight	15 Kg

As a Japanese wholly owned enterprise, BIOER TECHNOLOGY CO., LTD. is the manufacturing base of the Bio Flux Corporation whose headquarter lies in Tokyo, Japan. BIOER is committed to researching and manufacturing of hi-tech products for life science applications. Years of experience and technical know-how have been developed into three product lines： life science instrumentation, related reagents and disposables and general laboratory instrumentation,such as Real-time PCR systems, thermal cyclers, cooling & heating blocks,Nucleic Acid Purification Systems, HBV, HCV, HIV, GMO, nucleic acid purification kits and all kinds of constant temperature baths. These products are recognized in both the overseas and domestic markets and have won praise from customers all over the world, including: Hong Kong, Taiwan, Korea, Japan, India, Malaysia & USA.

BIOER moved to its new state of the art facility in September 2003 that occupies a floor space of 16,000 square meters . BIOER uses the latest computer technology throughout its production process and strictly follows international ISO 13485 standards aiming at creating a first-class brand and products with first-class after-sales services for its clients.